Hooked ends steel fiber end hooked steel fiber
1.Diameter:0.4mm-1.0mm
2.Length: 25mm-60mm
3.Material: low carbon steel wire
4.ISO 9001
1.General Introduction of the Hooked Ends Steel Fiber
The steel fiber is made of high-quality low carbon steel wire,with the characteristic
of the high tensile strength,good toughness,etcs.
2.Application
This product is widely used in the construction fields for concrete reinforcement
or the shotcrete for tunnle.
3.Quality assurance
According to the standard of JG/T3046-1999 Steel Fiber Concrete,
YB/T 151-1999 Steel Fiber for Concrete and ASTM AB820-90 Steel Fiber
for the Fiber-Rinforced Concrete.
4.Specification
<
Commodity | Diameter (mm) | Length (mm) | Aspect Ratios | Tensile Strength( MPa) |
Hook End Steel Fiber | 0.5-1.0 | 25-60 | 30-100 | 850- 1200 |
Waved Steel Fiber | 0.5-1.0 | 25-60 | 30-100 | 850-1200 |
Packing | bags or carton , 25Kgs net each, on pallets , or as your request | |||
Uses | industrial architecture , bridge, tunnel engineering and so on | |||
Remarks | special Steel Fibers are available according to the buyer’s requirements(tensile strength, diameter, length etc.). | |||
Send Inquiry to This Supplier
You May Also Like
-
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
Fiberglass Insulation Roll Width 1.2m, Density 12kg/m3 With or Without Paper/aluminum FoilNegotiableMOQ: 100 Rolls
-
Australia Hy Rib Lath Expanded Metal Lath 16*11 Mesh Size Stainless Steel for Roofing Floor Wall Plaster Work Supplied by ChinaUS$ 1.7 - 3.2MOQ: 1 Piece
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1
-
Wholesale Hot Rolled Steel Angle Bar (manufacturer)US$ 2,800 - 4,800MOQ: 1 Ton
-
Stainless Steel Stain Chrome Finished 36 Sheet Metal GaugeUS$ 1 - 30MOQ: 600 Pieces
-
Scaffolding British Type Pressed Sleeve CouplerUS$ 4 - 6MOQ: 5000 Pieces
-
ISO Access Cover Supplier Custom Made in Zhejiang China With 30 Years ExperienceUS$ 0.5 - 19.9MOQ: 500 Pieces
-
Antibacterial EPS Sandwich Panel for Prefab HouseNegotiableMOQ: 300 Square Meters
-
Custom Panel Cnc,control Panel Producer,suzhou PanelUS$ 5 - 10MOQ: 100 Pieces
