l HGJ series straw pellet cylinder dryer

Specifications

1.Large capacity
2.low fuel consumption
3.dry low cost
4.Resistance to overload ability

Introduction:

Drum dryer is one of the traditional drying equipment, equipment operation, reliable and large elasticity of operation, strong adaptability, large capacity, wide application in metallurgy, building materials, chemical, coal, fertilizer, ore, sand, clay, kaolin, sugar, and other fields, diameter: Φ 600 -  Φ 4000, depending on the requirement of dry length. Enter the body of a drying cylinder wet material transferred repeatedly copy copy board on the wall, throw down, were scattered in the process of the whereabouts of the device is broken into tiny particles, than the area of a substantial increase, and a good contact with hot air and drying. Drum dryer capacity big, less fuel consumption, dry low cost.

 

Technical features:
1. Use more groups of type feed device
Our company design and manufacture of the dryer did a variety of feed device on the system of the technological innovation, the new long combined feed device overcomes the traditional dryer "wind tunnel" phenomenon, high thermal efficiency and coal consumption reduced about 20%.
2. Apply to a variety of combustion furnace use: high temperature fluidized bed, grinding coal powder injection furnace and artificial coal stove.
3. The drive gear adopt pin column can change gear size, replace the traditional steel casting gear, save investment cost, and greatly reduces the maintenance cost and time.
4. Adopt centralized control system, and can realize large-scale enterprise computer central control management

 

 

 

Main Data:

 

model (mm)	inclination (%)	rotate speed(r/min)	inlet temperature(°C)	power (Kw)	volume (m3)	capacity(t/h)	weight(t)
Φ600×6000	3-5	3-8	≤700	3	1.69	0.5-1.5	2.9
Φ800×8000	3-5	3-8	≤700	4	4.01	0.8-2.0	3.5
Φ800×10000	3-5	3-8	≤700	4	5.02	0.8-2.5	4.5
Φ1000×10000	3-5	3-8	≤700	5.5	7.85	1.0-3.5	5.6
Φ1200×10000	3-5	3-8	≤700	7.5	11.30	1.8-5	14.5
Φ1200×12000	3-5	3-8	≤700	11	13.56	2-6	14.8
Φ1500×12000	3-5	2-6	≤800	15	21.19	3.5-9	17.8
Φ1800×12000	3-5	2-6	≤800	18	30.52	5-12	25
Φ2200×12000	3-5	1.5-6	≤800	18.5	45.59	6-15	33
Φ2200×18000	3-5	1.5-6	≤800	22	68.38	10-18	53.8
Φ2200×20000	3-5	1.5-6	≤800	30	75.98	12-20	56
Φ2400×20000	3-5	1.5-5	≤800	37	90.43	18-30	60
Φ3000×20000	3-5	1.5-5	≤800	55	141.3	25-35	78
Φ3000×25000	3-5	1.5-5	≤800	75	176.6	32-40	104.9