PLATE ROLLING MACHINE

Specifications

Plate rolling machine
1)DRO for back guage
2)Unlimited length cut for back guage
3)Front and side guard frame

Plate rolling machine,  3-rollear rolling machine, Rolling machine

excellent product precision 
rich bending shape 
CNC control high producing efficiency 
best after sale 

Upper roller force:                                      270 Tons

Diameter of the upper roller                       Φ450mm

Diameter of the lower roller                       Φ250mm.

Central distance between bottom shafts     400mm

Max width of coiled plate                           3000mm

Length of working rolls                              3100mm.

Max thickness of coiled plate             

Symmetry coiling thickness :          T30mm

Asymmetry coiling thickness:         T25mm

Coiling speed                                             ≈ 3.5m/min

Capacity                                                      σs≤245Mpa

Upper roller pressure speed: about 130mm/min

Supporting rollers: 4 rollers/group, 1 group

Drive coil power                                        37KW

Hydraulic system motor                             15KW

Horizontally  motor power                          5.5KW

      End pre-bending of high precision

When Bending the end, it can freely set the length of the edge. And when top roller presses down,  high accurate and pre-bending is done under a certain pressure.

 

l       Excellent product precision

Due to continuous bending and high accurate end pre-bending, products have superior precision. As the top roller is in the shape of drum, with the supporting roller adjusted, it can coil ideal products in the wide range from sheets to plates.

 

l       Rich bending shape

There are such different shapes as O shape, U shape and multi-section shapes. The method is as follows:

      O bending: back bending mode

      U bending: front bending mode

      Special bending: composition mode

 

l       Different uses with coordinating methods

There are following controlling methods according to its use:

TNC (Top NC): for many types but small quantity of production.

CNC(CNC): for many types but large quantity of production.

 

l       CNC control high producing efficiency

One operator, simple operation, and high efficiency.

 

Series large W11S hydraulic upper roller universal plate rolling machine –technical parameters

 

Model	Pressure of the upper roller (Tons)	Max plate thickness		Plate width (mm)	Diameter of the upper roller (mm)	Diameter of lower roller (mm)	Central distance (mm)
		Ending bending (mm)	Central (mm)
W11S-45*3000	540	40	45	3000	590	340	610
W11S-55*3000	610	45	55	3000	620	360	650
W11S-60*3000	690	50	60	3000	650	380	700
W11S-70*3000	850	60	70	3000	710	420	780
W11S-75*3000	930	65	75	3000	740	440	820
W11S-80*3000	1050	70	80	3000	770	460	880
W11S-85*3000	1150	75	85	3000	800	480	920
W11S-100*3000	1350	90	100	3000	860	480	920
W11S-115*3000	1600	100	115	3000	900	560	1080
W11S-125*3000	1800	110	125	3000	960	600	1120
W11S-120*4000	2300	100	120	4000	990	640	1280