Germany Technology High Quality QTJ4-26C Shengya Machinery Semi Automatic Concrete Brick/Paving Brick Making Machine Price
QTJ4-26C Automatic Construction Engineering Block Making Machinery Introduction
QTJ426C Fully Automatic Cement Block Shaping Machine has absorbs the advantages of different machines home and abroad , the new of machine was produced after research and development, considering the conditions of use and maintenance in the middle and small sizes factories that use cement block shaping machines.
Characteristics :
1. Transfer mechanism adopts mechanical drive, and use mechanical power reasonably and effectively, it can finish several technology actions without breaking. Transfer mechanism wears well and is convenient for corrective maintenance.
2. When the machine is forming concrete brick, it librates up and down. There is vibration table with vertical orientation under the mould box, and vibrator vibrates with compression over the crossbeam, thus when it produces concrete brick or pavement block, satisfactory shaping effect can be achieved, it fits for producing concrete brick or pavement block of high strength.
3. The machine is of multipurpose, it can produce walling unit, pavement block and figure walling unit, etc. Of many shapes and sizes, when consumer produce concrete brick or pavement with colorful layer, you can pull out the feeding arrangement, and set up a charging deck to adopt artificial feeding, which can not only save the cost of colorful layer, but also produce different kinds of concrete brick or pavement with colorful layer and so on.
4. The machine can use common plate as shaping baseboard.
5. The machine operates automatically, has high manufacturing efficiency, and needs low intensity of labor.
QTJ4-26C Automatic Construction Engineering Block Making Machinery Parameter
NO. |
Block size |
per mould |
hour productivity |
day productivity |
1 |
400*200*200mm |
4 |
310-400 |
2480-3200 |
2 |
400*150*200mm |
5 |
400-450 |
3200-4000 |
3 |
400*100*200mm |
7 |
550-700 |
4400-5600 |
4 |
400*250*200 |
3 |
230-280 |
1840-2240 |
production capacity |
400x200x200mm 3840 pieces /8hour |
400x150x200mm 4800 pieces/8hour | |
400x100x200mm 6720 pieces/8hour | |
power |
11.75kw |
overall size |
3000X1600X2500mm |
cycle |
26 seconds |
pallets size |
850x550x25mm |
vibration force |
40KN |
vibration frequency |
4000-4800/Minute |
rated pressure |
12Mpa |
total weight |
3500kg |
electricity source |
380v/50HZ |
(Reducer/Motor/Moulds/Controller)
(Finish Products)
Contact : Iris Chen Mobile: +86-13316165676(whatsapp) Skype: IrisChen26
Email: brick11 at
Send Inquiry to This Supplier
You May Also Like
-
QT5-20 Automatic Baking-free Concrete Clay Block/paver Making Machines/curb Stone Machinery Price ListUS$ 13,438 - 33,423MOQ: 1 Set
-
Hot Sale!!QTJ4-40B Hydraform Concrete Clay Block Making Machines,paver Making Machines Price List in IndiaUS$ 3,000 - 3,000MOQ: 1 Set
-
German Technology QTY4-40 Faking-free Cement Block Machines Small Scale Industries in India Images China ProductUS$ 5,500 - 7,000MOQ: 1 Set
-
SY-750 Fullly Automatic Hydraulic Figure Block MachineUS$ 8,700 - 8,900MOQ: 1 Set
-
QMJ4-45block Making Machine Block Making MachineUS$ 1,000 - 1,500MOQ: 1 Piece
-
Diesel Generator Block Making Machine/movable Block Making Machine (QM4-45)US$ 4,800 - 5,000MOQ: 1 Set
-
Interlocking Paver Blocks/brick Making Machine ,concrete Paver Block Machine SY7502US$ 8,700 - 8,800MOQ: 1 Set
-
Interlocking Concrete Blocks Sizes SY-1US$ 6,500 - 7,500MOQ: 1 Set
-
Interlocking Concrete Blocks Molds SY-1US$ 6,500 - 7,500MOQ: 1 Set
-
Diesel Generator Block Forming Machine (QM4-45)US$ 5,000 - 5,600MOQ: 1 Set










