Bikini Hair Removal Face Lifting Best Quality Dermatology Laser Equipment Co2 Breast Lifting Up Carboxytherapy Fractional With Gynecology Heads For Laser Beauty

The RF equipment has the cooling system of surface layer, and uses proprietary technology

to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The

heat will accelerate the blood circle, lets the fibre structure shrink instantaneously, and

stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time,

providing you with tighter skin, renewed facial contours.

Principle of RF CO2 Fractional Laser

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. 

Best Quality Dermatology Laser Equipment Co2 Fractional With Gynecology Heads For Laser Beauty

Our Product Advantage:

1.RF Laser Tube is more stable than traditional Glass tube, the machine is non serviceable.

2.RF Laser Tube makes the scanning dot much thinner and less harm.

3.The Laser Tube frequency can reach more than 5000HZ, high scanner can get better treatment effect.

4.Four working modes ,Fractional, CW, Pulse, Ultra Pulse ,one machine can been used in widely in different surgery.

5.Special designed energy self-inspected and energy-replenishment system ,improving the stability and effect.

6.Multi safety protection,  water, electric ,remote interlock warning alarm.

7.Laser anti-leak designing, confirm the operator and client safety.

8.Whole low voltage system, no electric danger and no electric radiation

9.China/USA/Glass tube for choose

10.

Fuctions and treatment effect of elight ipl rf 

1.Permanent hair removal.

2.Smooth wrinkles, face-lifting
3.Deep flecks, epidermis flecks or pigment treating the telangiectasis
4.Promote collagen to grow, strengthen flexibility of skin
5.Acne treatment
6.Shrink the thick pore
7.For endogenous pigment: nevus of Ota, coffee spot, age pigment, freckle etc removal
8.For exogenous pigment: tattoo, eyeliner and eyebrow removal
9.Skin whitening
10.Striae gravidarum removal

The Machine Detailed Application:

Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth, and density that are surrounded by a reservoir of spared epidermal and dermal tissue, allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser-delivery systems, enables high-energy treatments while minimizing risks.

Specification:

Light Source :RF TUBE Laser Generator

Wavelength:      10.6μm±0.1μm

Output Power:   1-30W

Focus Spot Diameter:≤0.1mm

Treatment depth 2000μm

Starting Voltage:    ≤25kV

Operating Voltage:    ≤15kV

Operating Current:    ≤25mA

Focal length of working head: f=50mm

Aiming Beam:Green Semiconductor Laser(532nm, 5mW)

Transmission System:7-Articulation Joint Spring-Balanced Light Guiding Arm

Smoke Exhausting System:  Built-in air blow

Cooling System:           

CO2 laser system

Treatment theory

e-light beauty equipment CE beauty machine combines three advanced technologies:Bipolar Radio Frequency + IPL + Skin Contact Cooling 

The working theory is heating the dermis to a target temperature gradually,at that target temperature, it damages the hair follicles and prevents re-growth effectively,meanwhile avoiding injury to the surrunding tissue.A high repetition rate of single pulses are delivered deep into the dermis,achieving high average power and therappeutically effectively heat bulit-up,without the risk of injury and no pain virtually.

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Environmental temperature:  5-40℃

Relative Humidity:         ≤80%

Power Supply:            AC 220V±22V;50Hz±1Hz

Weight:                 40kg

Working mode:

Continuous: power 1~30W step adjustable each 1 W

Single Pulse :working on time 10ms ~ 1000ms Adjustable

Pulse power: 1~30W step adjustable each 

Interval time: 10ms~1000msms Adjustable

Scanning Mode:

Scanning Area:Max20×20mm

Scanning type: Scan Graphics: linear, square, rectangular, triangular, hexagonal, round and oval    

Scanning Velocity :>10m/s

OutPut Power :450VA

Power Supply:~220V±22V,50Hz±1Hz

Dimension:

Application:

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Weight:40kg

The Machine Parts Detailed Photos:

Power line

Keys

7 joint torsion spring articulated arm  

 Scanner

The main machine

Our Factory Photos and Customers Visiting Photos:

Exhibition:

Main Technical Parameters:    

Laser wavelength: 10.6µm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

The range of IPL treatment:

(1)Everlasting hair removal:remove unwanted hairs under arms,on legs ,lips or other body part,etc.  

(2)Pigmentation treatment:remove various kinds of pigment such as freckle,chloasma,aged spots,sunburn,etc.

(3)Telangiectasis treatment:treat angiotelec-tasis.

(4)Acne treatment:papule,tuber,Blain,acne,etc.                 

(5)Shrink pores,tighten skin,improve skin elasticity and glossiness.

(6)Eliminate and smooth wrinkles,acne treatment.