2015 CO2 Fractional Laser RF Tube Scar removal skin resurfacing co2 laser head

CO2 Fractional-With USA RF Metal Tube

A "metal tube laser" uses a long metal tube (as opposed to glass) to contain the laser gas. The gas mixture contained inside and the tube is factory sealed. To make it lase, you need to excite the gas inside; with this type of laser an external RF (radio frequency) supply is used to generate energy that is absorbed by the gas inside the tube.

The Co2 fractional laser use the fractional power to create damage on the skin, then the skin would resurfing. After this process, a totally regeneracy of the new skin will show.We add many new features to this model to make it is the best on the market. German fractional system transfers the powerful laser into tens of dots, the energy of all the dots is 100% equal and exact.Besides those, the new scanning model also bring optional treatment choice for customizing.Last but not least, the Infrared Aiming let all the operation become much easier than ever.

Therapy

Step 1: Simply put, the laser will create several microscopic holes. The laser is engineered to reach a precise depth to optimize it rejuvenation effect. Generally speaking, the deeper the laser goes, the better the results will be.

Step 2: This ablative technique jump starts the cells into activity, thereby promoting collagen formation deep in the skin and new skin growth on the surface. This combined effect is what makes a laser resurfacing treatment so effective and so popular.

Step 3: This jump starts the body’s natural regenerative powers thereby promoting collagen formation and synthesis. The new collagen improves texture and tone deep in the skin while the epidermal layer renews.

Treatment

1. Remove stretch marks

2. Eliminate the scar, Traumatism

3. Improve Pore Bulky

4. Skin rejuvenation

5. Skin tightening and loosen (Deep Wrinkles and Shallow wrinkles)

6. Remove freckles and pouch

7. Actinic keratosis

8. Basal cell carcinoma

9. Burn debridement

 Technology Advantage

1. RF tube

With the RF tube ,the scanning depth can reach the derma layer , to accelerate the collagen re-growth,make the treatment more effective .Besides , RF Laser Tube makes the scanning dot much thinner and less harm.

2. Light Pipe

Light Pipe is the most important part in CO2 Laser, because this is the source of the laser. Our engineer especially redesign the light pipe in this machine. We use harder and higher quality glass to make the pipe, with this kind of glass, the light pipe is so strong that it can stand even shaking or little hit.

3. The Spot Area Pattern

We all know that co2 laser is used for skin treatment, and only when the target skin can be covered, we would get the best effect for the treatment. For this propose, the co2 laser can be output in many different shapes. Circle, square, triangle, straight line, hexagon. With the help of these shapes, the co2 laser can deal with all type of skin.

4. Light Guiding Arm

How to guide the light to the handle? This is a problem troubles people for so long time. But now, with our newest light guiding arm in the co2 system, we don’t have to worry about that. The newest light guiding arm is made of alloy, that is why it feels so light and convenient to use and control. Besides, we choose 7-Articulation arm to enhance the light without any waste.

5. Special Cooling System

We also use two layers to combine the water cooling system and the CO2 laser system. When the electricity passes through the light pipe, CO2 gas would be heated, this situation makes the light unstable. So that is why we use another glass water pipe cover the Gas pipe, to let water cool the Gas pipe.

6. Intelligent Operation System

As to CO2 system, there are two models, model A scans dot by dot, this model is used for serious scar treatment, this treatment is very fast. Model B scans with dot irregularly, this model is used for not serious scar treatment. Model B will make clients feel less painful.

7. Energy Stable

The co2 system fires many micro beams, these beams shoot the target area and bring the treatment effect. To make sure the energy of each beam is equal and this is the only way to get the best treatment effect. We add a power output control system to the power source, then one big beam can be divided into many small beams.

We Provide

1. 24 months warranty & Life long maintenance

2. User manual & Training video

3. Door to door delivery

4. Custom Clearance

About Faireal

1.Assembling Line

With the most advanced Assembling line, we provide the European standard product and services. We make sure every product is high quality and reliable, and this is the basic of Faireal globale business network

2.Engineering Design

With new breakthrough technologies currently in the pipeline, we are ideally positioned to maintain our global leadership and continue to help you grow your practice.

3.Specialized Laboratory

The newest hand piece, the high technology structure, the sapphire crystal. All these technology breakthrough comes from our specialized laboratory.

4.Quality Control Facility

We build the quality control system to avoid the risks. Every machine and part will be tested well to make sure there are no problem. Especially the anti-shaking test, never need to worry about delivery.

5.Senior Engineer Conference

The senior engineer conference is organized for solving and discussing enginnering projects. We combine a level of innovation, expertise and customer understanding superior in our industry.;

6.Overseas Sales Team

Together, we are more market responsive than ever before. We know how to quickly innovate the safest and most effective products to meet a variety of needs and price points.

1.What is it used for?

Fractionated CO2 lasers excel at treating deeper wrinkles, more severe textural changes from sun damage, wrinkles, blotchiness, acne scars, and surgical or traumatic scars. It can be used on the delicate eyelid skin and around the mouth. It is also a very effective treatment for sun damage and precancerous growths.

It can be used to improve texture, wrinkles, and blotchiness on the neck, chest, arms and legs but this should only be done by experts because the risk of complications, including scarring, is higher in these areas.

2.What does it NOT do?

It does not take care of redness including- dilated blood vessels (telangectasias), or that reddish blotchy discoloration on the neck (poikiloderma). Temporarily, it can even make these problems look worse because the laser treatment itself causes some redness. For problems with red and veins, a medical (not salon) grade IPL or pulsed dye laser is more effective.

So the question of which fractionated laser system to choose is important. How do you, as a consumer, figure it out? First, find a reputable Medical Spa, cosmetic dermatologist or plastic surgeon. Good equipment in incompetent hands will not help you!

3.How does the fractional CO2 laser work?

The fractional CO2 laser takes the CO2 laser beam and fractionates, or pixellates that beam into thousands of tiny little shafts of light. These tiny shafts of light penetrate into the deeper layers of the skin. The skin then repairs those tiny shafts by pushing out the old sun damaged skin and replacing it with new skin. The "collateral" heat damage also helps to shrink existing collagen.Can I do the fractional CO2 laser with other cosmetic treatments?

4.How long do the effects of a fractional CO2 resurfacing laser treatment last?

That depends on how well you protect your skin from the sun and other factors that cause aging like your general health, smoking, changes in weight, etc. If you apply sunscreen and wear brimmed hats, you can maintain the good effects of your CO2 laser treatment for several years.

5.How long does the fractional CO2 laser take to work? When will I see results?

Bear in mind that the fractional CO2 laser can be customized. Treatments can be deeper, with more healing and downtime, or shallower, with less healing time. The deeper the treatment, the better the results generally. But some patients prefer to have two treatments that aren't as deep so they can avoid a lot of downtime.

You will see some immediate results but you won't see the full results for 3-6 months. After your skin heals, which may take up to 3-14 days, there will be a period of 4 to 6 weeks after that when your skin might be slightly pink. During this period, your skin will feel smoother and looks less blotchy. As the color returns to normal, you will see fewer lines, less blotchiness, and more glow.

6.How are fractional CO2 laser treatments performed?

You need to arrive 1 hours before your treatment. You or a technician will cleanse the treatment area and then apply a numbing cream to the area to be treated. Then you just relax, read, and listen to music, while the numbing cream takes effect.

After you numb for about 30 minutes, the numbing gel will be removed. The treatment takes about an hour for a full face and feels a little like a "pins and needles" sensation. The discomfort ranges from mild to moderate (2-4/10). Plan on being in the office for 1 ½ to 2 hours total.

7.How does this laser work for acne scars and other scars?

CO2 lasers have always been very effective for acne and other scars and the fractionated CO2 is no exception. It remains to be seen if it is as effective as the traditional CO2. However, as the settings for the "DOT" or "Deep Fx" for both acne, surgical and traumatic scars keep being improved, many of us think that results will be as good without many of the risks with the older forms of this laser.

8.Are treatments on the eyelids safe?

Yes, because special laser "contact lenses" are used to protect the eye. Don't let anyone do treatments directly on the eyelids without these. Numbing eye drops are placed in the eye before insertion of a contact lens-like eye shield. A protective ointment on the side next the eye cushions the special shield. The shield fits comfortably within the eye and is easily removed at the end of the treatment. Even our patients who don't wear contact lenses have been comfortable.

The eye treatment is then performed on the upper & lower eyelids. It is normal (as with all areas treated with the fractional CO2 laser) to have swelling and redness for 2-4 days after the treatment. You also have to avoid all sun exposure during the healing time. Plan on 2-3 weeks for being "camera ready."

9.What will I look like right after the treatment and what is the healing time?

During the first 24 hours after treatment, your skin may feel as though it is sunburned.

Your skin will peel for 2-7 days and will be pink for 3 to 6 weeks. This healing all depends on how deep your treatment is. After a few days, you can wear make-up to cover the pink. Rarely, bruising may develop, which can take up to two weeks to resolve. Allow 2-4 weeks for weddings, reunions, family pictures, etc. just to be safe. Allow longer for body sites like arms or legs.

10.Can I go back to work and activities immediately?

No, you will need to take the rest of that day off to care for the treated area. For the lighter fractional CO2 treatments, you will need 3-5 days of downtime. For the deeper treatments, plan on 7-10 days of healing.