7 jointed articulated arm delivery Fractional 2940nm er laser

7 jointed articulated arm delivery Fractional 2940nm er laser

Model: MES-620

- 2940nm laser output
- 7 jointed articulated arm delivery
- 7×7,9×9,13×13 MLA optional
- Intelligent alarm system

What's METOS Different? 
1. Over 10 years' professional experience on YAG laser guarantee product quality 
2. T-PULSETM resonator technology produced better beam quality 
3. Strong energy output: Exceed 2.2J@1ms, ensure your treatment result 
4. Excellent water cooling with intelligent alert system, more safety and longtime reliable working 
5. 8.0" TFT color touch screen and arm with diode laser beam guide, easy for operation 
6. 10Hz high repetition with 7mm big spot size, save your time 
7. Fractional application update, protect your investment

Why 2940nm Er:YAG laser?
The Er:YAG laser produced 2940nm laser which has peak value of absorption to
water, then it can be well-absorbed by water. The absorption coefficient is 10 times of
CO2 laser.

So Er:YAG laser can dispel thinner tissue than CO2 laser, it can only penetrate the
skin moist a few microns
in depth, their skin in a time of relaxation 1-5ms, the extent of the damage stranded
heat also very light, not vaporization of the organization of the solidification of a thin
layer, bleeding only needle size.

The new fractional 2940nm laser that represents a new option to perform skin
resurfacing on aged and photo-damaged skin: it is a safe and effective treatment with
little patient downtime and discomfort, no analgesia and
no gel or consumables required.

Multi-treatment Mode to Patient’s Expectation
The penetrate depth depend on the pulse width of laser. So, you can choose and
control the treatment mode
by different pulse width to suit patients’ expectations. All the parameters setting just
on screen by touch.
Short pulse mode: with fast surface treatment
Long pulse mode: with deeper increased thermal effect
Mixed mode: alternate with short and long pulse

Fast and Effective Treatment with High Energy
1.High energy density output with wide range of pulse width adjust
2.Less treatment time with high repetition rate up to 10hz
3.Update to fractional application with optional MLA handpiece easily

Typical Application
1.Skin resurfacing for improvement fine lines and wrinkles, skin laxity, tone
2.Acne scar removal, superficial skin lesions revision
3.Pigmented lesions treatment

Specifications

l Laser Type:Er:YAG Laser;

l Wavelength: 2940nm;

l Max.Energy output: 2J at single mode, 1.5J at fractional mode;

l Pulse Width: 0.3-1.0 ms adjustable with 0.1ms step;

l Max.repetition Rate: 5Hz;;

l Spot Size: φ1-7 mm (Single mode);

                         13×13 dots at 10×10mm2 (Fractional mode by MLA)

l Cooling System: Closed Cycle Water to Air Heat Exchanger;

l Delivery: 7 jointed articulated arm;

l Control System: 8.0"TFT color touch screen;

l Electrical Power: 220VAC,50/60Hz;

l Net Dimensions: 960(H)×380(W)×805(D)mm;

l Net Weight: 120Kg.