Portable Er yag laser 2940nm fractional laser with Intelligent alarm system

Portable Er yag laser 2940nm fractional laser with Intelligent alarm system

Model: MES-610

- 2940nm laser output
- Smart handpiece delivery
- 7×7,9×9,13×13 MLA optional
- Intelligent alarm system

Why 2940nm Er:YAG laser?
The Er:YAG laser produced 2940nm laser which has peak value of absorption to
water, then it can be well-absorbed by water. The absorption coefficient is 10 times of
CO2 laser.

So Er:YAG laser can dispel thinner tissue than CO2 laser, it can only penetrate the
skin moist a few microns
in depth, their skin in a time of relaxation 1-5ms, the extent of the damage stranded
heat also very light, not vaporization of the organization of the solidification of a thin
layer, bleeding only needle size.

The new fractional 2940nm laser that represents a new option to perform skin
resurfacing on aged and photo-damaged skin: it is a safe and effective treatment with
little patient downtime and discomfort, no analgesia and
no gel or consumables required.

Multi-treatment Mode to Patient’s Expectation
The penetrate depth depend on the pulse width of laser. So, you can choose and
control the treatment mode
by different pulse width to suit patients’ expectations. All the parameters setting just
on screen by touch.
Short pulse mode: with fast surface treatment
Long pulse mode: with deeper increased thermal effect
Mixed mode: alternate with short and long pulse

High energy, provide the fast and effective treatment result

1. High energy density output with wide range of pulse width adjust
2. Multi-tips for your treatment: 7×7,9×9 and 13×13
3. Update to fractional application with optional MLA handpiece easily

Intelligent ICMS

ICMS™ is our superior design on water cooling system management. The intelligent cooling management system provided real time monitor for the water cooling status.

All the alerts of cooling system are monitored by MCU control system,once any function work unproperly, the MCU would protect the system with corresponding procedures.Thus, you can work with MES-610 for longtime without any worries and break.

Typical Application

1.Skin resurfacing for improvement fine lines and wrinkles, skin laxity, tone
2.Acne scar removal, superficial skin lesions revision 

3.Pigmented lesions treatment 

Specifications

l Laser Type: Er:YAG Laser;

l Wavelength: 2940nm;

l Max.Energy output: 1.8J/cm2( 1.5J/cm2 for desktop) Max;

l Pulse Width: 0.3-1.0ms( 0.3ms for desktop);

l Max.repetition Rate: 1-5Hz( 2Hz for desktop);

l Spot Size(Single mode): φ1-7mm(φ7mm for desktop)

l Fractional MTZ:7×7,9×9(option),13×13(option)

l Cooling System: Closed Cycle Water to Air Heat Exchanger;

l Control System: 8.4"TFT color touch screen;

l Electrical Power: 220VAC,50/60Hz;

l Net Dimensions: 435(H)×225(W)×375(D)mm;

l Net Weight: 20Kg.

 Photos:

We also could provide the customized products as your requirements. Please feel free to contact with us.

If you have any question, contact me freely.

Vicky

Skype: tos