Contact Platform Support
Help Center
Related Products
-
Wrinkle Removal Fractional Co2 Laser ScannerUS$ 1 - 6,000MOQ: 1 Set -
10600nm Co2 Fractional Laser System for Beauty SalonUS$ 1 - 6,000MOQ: 1 Set
-
100um-2000um 0.1-2.6mm Fractional Co2 Laser Skin Spot Portable Scar 10600nm Remove Neoplasms Pigment Removal Resurfacing Machine Remove Neoplasms Ultra PulseUS$ 1 - 6,000MOQ: 1 Set
-
8.0 Inch Mole Removal 15W Portable Fractional Skin 100um-2000um Regeneration 40w Vagina Tightening Co2 Cutting Laser Machine Warts Removal Stretch Mark RemovalNegotiableMOQ: 1 Set
-
Fractional Co2 Laser 8.0 Inch Equipment Portable RFUS$ 1 - 6,000MOQ: 1 Set
10600nm CO2 Fractional Laser skin resurfacing
Model #: MES-300
How it works?
CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.
Is Fractional CO2 laser treatments safe to treat acne scars in darker skin types?
Dr. Schweiger safely treats acne scars in patients with all skin types including Asian, Indian, and African-American skin. An experienced laser surgeon is needed to treat darker skin types safely.
What is the downtime for this laser treatment?
The fractional CO2 laser causes a wound in the skin which means you will have three to four days of downtime when the skin is healing. During that time you have to apply an ointment frequently to your face keep the skin greasy, which makes healing faster.
What are the side effects of Fractional CO2 resurfacing?
The main risks are temporary or long-lasting light or dark spots from treatment. Very rarely scarring can still result. For these reasons it is important to be treated by an experienced laser surgeon.
What type of anesthesia is used during the procedure?
The whole procedure is done under local or topical anesthesia. You are awake and comfortable the entire time. Prior to the procedure, topical numbing cream is applied for 60-90 minutes. In addition, valium is given prior to the procedure to facilitate relaxation. Using these measures there is usually minimal discomfort during the resurfacing procedure.
Applications:
Skin renewing and resurfacing
Wrinkle removal, skin tightening
Acne and acne scar removal
Smooth burnt scars and surgery scars, etc
Remove intractable chloasmas and pigmentation
Sun damage recovery.
Advantages:
1. It will have thermal shock on a small area of skin and retain that portial skin is not affected
2. The fractional laser can remove the stain of the skin to stimulate the hyperplasia of collagen
3. Without effecting to the skin organizations as the thermal diffusion region to avoid any possible heat injury and to promote the healing of skin
4. A few days after collagen hyperplasia of micro-heating area appear micro-callus exfoliation, the effects of treatment maintained over the years
5. Operate easily, pain is minor, non-bleeding, no side effects, short recovery period
6. Shorter treatment time, non-chromatosis and no pigment miss out, no additional consumables
7. Cover area of 20% every treatment, total 4-6 times treatment, interval 3-4 weeks.
Specifications:
Laser Type | CO2 |
Wavelength | 10600nm |
Beam Delivery | 7-joint arm |
MaximumOutput Power: | 15W/30W/40W |
Optical Beam Quality | TEM |
Spot Size | 0.12-1.25mm (Adjustable) |
Power of the Aiming Beam | <5mW |
Aiming Beam | 635nm |
Scanning Mode | Randomized Scanning |
Laser Operating Mode | UltraPulse, CW, Fractional |
Cooling | Air Cooling |
Pulse Energy | 10mj~200mj (every stepping:2mj) |
Spot Pattern | Triangle/Square/Rectangle/Rhombus |
Pulse Interval | 1ms~100ms (every stepping:1mj) |
Scan Area | 10mmx10mm,20mmx20mm,30mmx30mm |
Working Mode | Continuous operation |
Spot Density | 36 spots/cm,144 spots/cm,576spots/cm,with intermittent loading |
Power Supply | AC 220V 50Hz/AC 110V 60Hz |
Net Weight | 45KGS |
Gross Weight | 60KGS |
Dimensions (after packaged) | 760mmx455mmx975mm |
Photos:
Shipping:
Delivery term: 3-5 working days via express like DHL, UPS, TNT, Fedex, etc., air cargo shipping, or by sea.
Our Services:
*Warranty:
We offer 1 years free warranty, lifetime maintain, 24 hours calling service.
*OEM ODM:
(1).Software adjustment (logo &menu design, different languages)
(2).Unique machine shape design
(3).Treatment handle, filters design.
(4).Package (style, material, label design)
(5).According to the budget, machine weight, size, provides reasonable projects.
We also could provide the customized products as your requirements. Please feel free to contact with us.
Skype: tos
Tel: 0086-10-58430537
Send Inquiry to This Supplier
You May Also Like
-
Portable Co2 Fractional Laser for GynecologyUS$ 1 - 6,000MOQ: 1 Set
-
Portable Fractional Co2 Laser 30w With CE ISOUS$ 1 - 1MOQ: 1 Set
-
2015 Newest Gynecology Fractional CO2 Vaginal Rejuvenation LaserNegotiableMOQ: 1 Set
-
Gynecology Vaginal Rejuvenation Laser Fractional CO2NegotiableMOQ: 1 Set
-
New Gynecology Fractional CO2 Laser VRL Vaginal RejuvenationNegotiableMOQ: 1 Set
-
10600nm Fractional CO2 Laser Vaginal TighteningNegotiableMOQ: 1 Set
-
2015 Hot New Medical CO2 Laser Vaginal TighetingNegotiableMOQ: 1 Set
-
NEW Vertical 10600nm CO2 Fractional Laser Vaginal RejuvenationNegotiableMOQ: 1 Set
-
10.6um RF Excited Fractional CO2 Laser Skin Tightening Machine Spot Scar Pigment RemovalUS$ 1 - 6,000MOQ: 1 Set
-
Newest Fractional Vaginal Tightening Co2 LaserUS$ 1 - 6,000MOQ: 1 Set
