OEM/ODM Customized Remove Spot Beauty Instrument With Diamond Tips

 OEM/ODM Customized remove spot beauty instrument with diamond tips 

JC-2937

1. Introduction of OEM/ODM Customized remove spot beauty instrument with diamond tips 

Microdermabrasion On-The-Go

Smoother and more radiant skin. Anywhere, Anytime. Salon-quality microdermabrasion for soft, clear, glowing skin on the go!

Microdermabrasion is an easy to use, personal microdermabrasion tool that delivers results on par with clinical treatments over time, yet is basic enough for novice users to operate. You don't have to be a professional to get great results. The MiniMD is super simple to use with just a little bit of practice. It takes only 5 minutes to get back that smooth, glowing, and youthful looking skin that is just below the surface! Regular treatments may improve the appearance of fine lines and wrinkles, sun-damaged skin, age and liver spots, acne scars and other mild scarring, dull uneven skin tone and texture, rough skin on hands and feet, skin conditions like Ketosis Pilaris, and large unsightly pores.Smoother, softer, more radiant skin is just 5 minutes away with the RejuvadermMD portable microdermabrasion device. This lightweight and portable glow-getter uses a high tech combo of diamond exfoliation and gentle suction to buff away dead skin cells, revealing the radiant, glowing skin that sits just below the surface. RejuvadermMD safely and effectively reduces the appearance of fine lines, age spots, sun damage, and mild scarring at a fraction of the cost of in-office treatments! Toss it in your purse, gym bag, or travel case (along with the power adapter) for salon-quality treatments anywhere, anytime! Safe for all skin types including sensitive skin.

2.Different tips for used in OEM/ODM Customized remove spot beauty instrument with diamond tips 

3. Features & Functions of OEM/ODM Customized remove spot beauty instrument with diamond tips 

4. Treatment steps with OEM/ODM Customized remove spot beauty instrument with diamond tips 

(1) Facial Treatment Routine 

• Wash and dry your face

• Remove the handle from the charging base and fit your choice of diamond tip with a new black wool filter.

• Press and hold the power button for 2 seconds to turn the unit on. Press as required to increase the power level, as indicated by the LEDs. It is recommended to    start on level 1 for the first treatment and to progress to a higher level if comfortable. See also MAX recommended levels in the above diagrams

• Place the diamond tip flat against the skin until you feel suction then move it slowly across the surface of the skin in a smooth motion, covering the same area no more than 2-3 times in one treatment. Do not press hard. In some areas it can help to hold the skin taught with the other hand (eg. around the eyes).

• The diagrams will help you establish an effective facial routine.

(2) After treatment

• Press and hold the power button for 2-3 seconds to turn off device.

• Wash your face with cold water to remove any remaining dead skin cells and then apply your preferred moisturizer. NOTE: Avoid using AHA (acid based) moisturisers on the day of treatment

• Depending on your skin type, you may experience some reddening or increased sensitivity after treatment. This is perfectly normal and usually subsides within a few hours.

• Avoid direct sun exposure after treatment, consider applying a stronger sunscreen as required.

• Always, dispose of the used black wool filter and replace with a new filter ready for next use.

• Remove dead skin cells and debris from the diamond tip using the brush provided. We also recommend the periodic use of an ultrasonic cleaner for deep cleaning the diamond tip, especially if it starts to feel smooth or less effective

(3) Other Treatments for diamond faceting machine

• Wash and dry your face

• Remove the handle from the charging base and fit your choice of diamond tip with a new black wool filter.

• Press and hold the power button for 2 seconds to turn the unit on. Press as required to increase the power level, as indicated by the LEDs. It is recommended to    start on level 1 for the first treatment and to progress to a higher level if comfortable. See also MAX recommended levels in the above diagrams

• Place the diamond tip flat against the skin until you feel suction then move it slowly across the surface of the skin in a smooth motion, covering the same area no more than 2-3 times in one treatment. Do not press hard. In some areas it can help to hold the skin taught with the other hand (eg. around the eyes).

• The diagrams will help you establish an effective facial routine.

Other areas of the body can also be treated 2-3 times a week. For example, neck, chest, hands etc. When treating larger areas, replace the black wool filter part

way through the treatment in order to maintain the level of suction. Aim to cover the same area no more than 2-3 times in one treatment. A body tip for wider coverage and a precision tip for targeting smaller problem areas, are both available separately from our website. See ACCESSORIES AND SPARE PARTS.

5. How it works ? 

6. Benefits for OEM/ODM Customized remove spot beauty instrument with diamond tips 

*Improves the overall tone and health of the skin.

*Reduces the appearance of fine lines and wrinkles.

*Reduces the appearance of brown sports caused by sun and age.

*Vascular stimulation and collagen production.

*Improves the skins texture and smoothness.

*Improves the appearance of mild acne, and superficial scarring.

*A treatment to help improve the appearance of keratosis pilaris, also known as chicken skin or red bumps.

*An effective treatment to help improve the appearance of mild stretch marks.

* Allows for better absorption of skincare products.

7. FAQ for OEM/ODM Customized remove spot beauty instrument with diamond tips 

(1)How often should I use the product?

It’s best to start slowly – usually just once a week, then build up to 2 or 3 times a week if this is comfortable for your skin.

(2)Will it hurt?

No. Treatment should not be painful. Depending on the sensitivity of your skin,you may feel slight discomfort from the diamond tip as it moves across the skin and there could be some short term redness or sensitivity after treatment, but this will soon subside. If treatment is uncomfortable, then you may need to use a lower power setting or switch to the sensitive diamond tip.

(3)Can I use the product in combination with anti-aging creams/serums?

If your anti-aging cream or serum contains AHA (or acid) then it should not be used on the same day as the microdermabrasion treatment, but can be used on non-treatment days. Non-AHA (acid free) anti-aging products can be used at any time.

(4)The product does not switch on

The power button has to be pressed continuously for 2-3 seconds to turn the product on. If you try this and it still doesn’t work, then it may need recharging. See “CHARGING THE BATTERY”

(5)The product seems to be losing power

This can happen if the black wool filter is not replaced after each treatment. Try fitting a new filter. Also check the tip to ensure that the plastic part of the tip has no cracks or damage. Check that the two rubber o-rings are in place on the nozzle end of the unit (where the tip fits over).

(6)The diamond tip no longer seems rough

The diamond tip can accumulate skin cells over time which may start to make it feel smooth and reduce its effectiveness. If this happens we recommend cleaning the diamond tip in an Ultrasonic Cleaner. These are either available to purchase,or jewelry stores offer a cleaning service. If using the product regularly you may need to do this several times a year to maintain optimum effectiveness.

8.  More pictures of OEM/ODM Customized remove spot beauty instrument with diamond tips 

Company Certificates:

Product certificates:

Strategic Partner: