Contact Platform Support
Help CenterCable Joints 15/200 Grounding Elbow Connector
Related Products
-
Cable Joints 200A, 25KV Load Break Elbow ConnectorNegotiableMOQ: 50 Pieces -
Cable Accessory 35/200 Load Break Elbow ConnectorNegotiableMOQ: 50 Pieces
-
Cable Joints T2T-15/600 Dead Break T-II ConnectorNegotiableMOQ: 100 Pieces
-
Cable Joints RU TTL-15/600 Tee Connecting PlugNegotiableMOQ: 50 Pieces
-
600A 15kV Integral Deadbreak BushingNegotiableMOQ: 100 Pieces
Specifications
1. testing the cables and underground apparatus2. 15KV/200A Grounding Elbow connector
3. cable joints
4. KEMA report
General cable joints
The RU JDT-15/200 Grounding Elbows have become part of the preferred operating procedure for deadfront underground systems because they take advantage of the fault close-in characteristics of loadbreak terminators. It is the essential component for testing the cables and underground apparatus.
A Grounding elbow can be used either itself or with a 200A,15kV Class rated Loadbreak Bushing Insert, Rotatable Feedthru to visibly ground cables, transformers and switchgear. A grounding elbow at each end of a cable will isolate and ground the cable and keep bushings free from moisture and contamination during the grounding operation.
The grounding elbow is molded of high quality orange insulating rubber and features a copper connector and tin plated copper probe complete with an arc follower tip. A 2-metre length of 600 volt insulated, flexible stranded copper ground cable is included. Determine whether the circuit is de-energized. Attach the ground cable to the system ground. Use a hot-stick to attach the grounding elbow to the mating apparatus.
Interchangeability
All RU Power System 200A Grounding Elbow connectors conform to the electrical, mechanical and dimensional requirements of ANSI/IEEE Standard 386. The loadbreak elbow connectors can be used on any comparably rated bushing interface that also meets the requirements of this standard.
Electrical Characteristics:
Voltage Rating and Characteristics | |
Description |
kv |
Standard Voltage Class |
15 |
Max Rating Phase to phase |
14.4 |
Max Phase to ground |
8.3 |
AC 50 Hz 1 minute Withstand |
42 |
DC 15 minute Withstand |
53 |
BIL and Full Wave Crest |
95 |
15kv Partial Discharge |
≤10PC |
Current Ratings and Characteristics | |
Description |
Amperes |
Continuous |
200A |
Switching |
10 operations at 200A, 14.4kv |
Fault Closure |
10kA |
Short time |
10kA rms symmetrical for 0.2s 3.5kA rms symmetrical for 3.0s |
Electrical Characteristics are in accordance with or exceed GB/T 12706.4-2002, ANSI/IEE 386-1995, IEC 60502-4:1997 | |
Send Inquiry to This Supplier
You May Also Like
-
Quick Connector for Power Cables – Dedicated to Cable FeedersUS$ 3 - 10MOQ: 5 Combos
-
Flanged Waterproof Sealing Hydraulic Dust Proof Cap for 7/16 Din Male Plug PlasticNegotiableMOQ: 100 Pieces
-
Wire to Wire ConnectorNegotiableMOQ: 2300 Pieces
-
USB ConnectorUS$ 0.01 - 0.03MOQ: 10000 Pieces
-
WII AV ADAPTORNegotiableMOQ: 10 Pieces
-
Wago Terminal Block With Vde 3.5 mm ScrewlessUS$ 0.0162 - 0.0209MOQ: 10000 Poles
-
Good Service no Quality Discrepancy Trade Assurance ConnectorsUS$ 0.05 - 0.5MOQ: 1000 Pieces
-
1pcs 3.5mm Male AUX Audio Plug Jack To USB 2.0 Female Converter Cable Cord Car MP3 NewesUS$ 1 - 100MOQ: 100 Quarts
-
Three Hole ConnectorNegotiableMOQ: 1
-
USB AM-BF Adaptor VK2-0058US$ 0.5 - 1.99MOQ: 5000 Pieces
