Contact Platform Support
Help CenterSmall Copper Melting Furnace ,melting Furnace for Copper
Related Products
-
50-35000 KW Induction Billet Heating Furnace,induction Furnace for BilletsUS$ 1,000 - 80,000MOQ: 1 Set -
Hot Sale Medium Induciton Melting Furnace (50kg-10000kg)US$ 1,000 - 50,000MOQ: 1 Set
-
KGPS-200kg Aluminium Melting Furnace,aluminium Scrap Melting FurnaceUS$ 1,000 - 50,000MOQ: 1 Set
-
500 KW Intermediate Frequency Induction Heating Tube FurnaceUS$ 1,000 - 50,000MOQ: 1 Set
-
Vacuum Heat Treatment Furnace,heat Treating FurnaceUS$ 1,000 - 80,000MOQ: 1 Set
Introduction and application
Medium Frequency Induction Furnace is the device converting three phase power current into single-phase intermediate frequency current and enabling metal to produce eddy current loss through the electromagnetic field induction to achieve heating and melting. Mainly be used in the material of ferrous and non-ferrous metal casting, melting and heating treatment industry, such as iron, steel, brass, cooper ,zinc ,tin and so on. As well as heating treatment prior to forging, sintering and tube-bending forming in casting and melting industries.
Performance Characteristics:
1.Zero-voltage scanning soft , available for start or stop at any time under any state without impact on power supply;
2.Speedy melting, low production cost , low pollution, conforming to environmental protection requirement;
3.Melting directly from low temperature, available for fully emptying of solution , easy change of category of melting material;
4.Flexibly adjustable power, easy and continuous smooth adjustment, easily controllable temperature, low oxidization loss, uniform metal content;
5.Furnace shell with cast aluminum ally or steel shell construction, small footprint, easy overturn body, available for selection of electric, manual, hydraulic or other overturn mode as needed;
6.Contravariant automatic regulation circuit available for matching of load impendence automatically, maintaining good operation without regulation or compensation of capacitance; power supply with fault diagnosis facilitating service.
Equipment Type & Technical Parameters:
| Equipment Type (Furnace capacity) | Power input(Three-phase Four- wire 50/60Hz) | Power Output | Melting Time (Minutes) | Power consumption per ton of material (KW) | |||||||
| Rating power (KW) | Input Voltage (V) | Input Current (A) | DC Current (A) | DC Voltage (V) | IF Voltage (V) | IF frequency (KHZ) | Steel (KW) | Iron (KW) | Copper (KW) | ||
| KGPS--0.05T | 50 | 380 | 80 | 100 | 500 | 750 | 1-2.5 | 20-60 | 850 | 800 | 450 |
| KGPS--0.1T | 100 | 380 | 160 | 200 | 500 | 750 | 1-2.5 | 20-60 | 800 | 750 | 450 |
| KGPS--0.2T | 160 | 380 | 256 | 320 | 500 | 750 | 1-2.5 | 30-70 | 750 | 700 | 440 |
| KGPS--0.25T | 160 | 380 | 256 | 320 | 500 | 750 | 1-2.5 | 30-70 | 750 | 700 | 440 |
| KGPS--0.3T | 200 | 380 | 320 | 400 | 500 | 750 | 1-2.5 | 30-70 | 700 | 650 | 430 |
| KGPS--0.5T | 250 | 380 | 400 | 500 | 500 | 750 | 1-2.5 | 30-70 | 650 | 600 | 430 |
| KGPS--0.75T | 400 | 380 | 640 | 800 | 500 | 750 | 1-2.5 | 40-70 | 630 | 580 | 400 |
| KGPS--1T | 600 | 380 | 960 | 1200 | 500 | 750 | 0.7-1 | 40-70 | 600 | 560 | 390 |
| KGPS--1.5T | 1000 | 380 | 1600 | 2000 | 500 | 750 | 0.7-1 | 50-70 | 580 | 530 | 380 |
| 660 | 912 | 1140 | 880 | 1300 | |||||||
| KGPS--2T | 1250 | 380 | 2000 | 2500 | 500 | 750 | 0.5-1 | 50-70 | 560 | 520 | 370 |
| 660 | 1140 | 1430 | 880 | 1300 | |||||||
| KGPS--3T | 1500 | 380 | 2400 | 3000 | 500 | 750 | 0.5-1 | 50-80 | 530 | 510 | 350 |
| 660 | 1370 | 1710 | 880 | 1300 | |||||||
| KGPS--5T | 2500 | 380 | 4000 | 3200 | 780 | 1170 | 0.3-1 | 60-90 | 510 | 490 | 340 |
| 660 | 2272 | 2840 | 880 | 1300 | |||||||
| KGPS--10T | 5000 | 660 | 4560 | 5700 | 880 | 1300 | 0.3-1 | 70-100 | 500 | 450 | 320 |
| Furnace temperature:1.Steel 1650°C 2.Iron 1450°C 3.Copper 1050 °C 4.Brass 900 °C 5. Aluminum 700 °C | |||||||||||
Remark:
*1.Melting time and power consumption/ton is important to equipment power, raw material shape and weight, operator's skill level and other elements;
*2.Power parameters shall be subject to steel melting; lower power is required by melting of copper, aluminum, zinc or other material with low melting point; please consult Rongdongsheng Technical Department for specific data
*3.Configuration :an intermediate frequency power supply,a capacitor cabinet, an overturn control cabinet, body, two sets of reduction boxes and supports, two water cooling cables, etc
* 4.The above data is of standard model. We also provide customized non-standard products with different power or melting speed.
Technical and After-Service
We provide not only excellent equipments but also perfect after-sale service as below:
1. We also provide customized. Can custom made non-standard products with different power and smelt time according customer requirement.
2. All favorable price will to provide various spare parts depend on your order/
3. Moreover, we are kindly help customer to installing and testing the equipment, and provide the install and operate illustrated books .
4. Free technical training , technical consult
5. Provide long-term technical services and follow-up service.
6. Product quality guarantee period for a yea after buy equipment.
Send Inquiry to This Supplier
You May Also Like
-
KGPS0.1T 100KW Induction Melting Furnace Price for SaleUS$ 1,000 - 10,000MOQ: 1 Set
-
100kg 100kw Cast Iron Melting Induction FurnaceUS$ 1,000 - 80,000MOQ: 1 Set
-
Small Industrial Metal Melting Furnace for Copper , Aluminum, Iron , SteelUS$ 1,000 - 60,000MOQ: 1 Set
-
Precious Metal Melting Furnace, Srap Metal Melting FruanceUS$ 1,000 - 50,000MOQ: 1 Set
-
Hot Sale Induction Smelter, Smelter,copper SmelterUS$ 1,000 - 50,000MOQ: 1 Set
-
300kg 200kw Pig Iron Melting Induction FurnaceUS$ 1,000 - 50,000MOQ: 1 Set
-
Steel, Cooper ,Aluminum IF Induction Melting FurnaceUS$ 1,000 - 50,000MOQ: 1 Set
-
50-5000KG Steel Iron Copper Brass Aluminum Induction Melting Furnace PriceUS$ 100 - 100,000MOQ: 1 Set
-
Copper,aluminum,zinc and Various Materials and Alloys Melting FurnaceUS$ 1,000 - 8,000MOQ: 1 Set
-
0.1ton 100kw Induction Melting FurnaceUS$ 1,000 - 8,000MOQ: 1 Set
