Semiauto PE film Hot Shrink Film Package Machine

Specifications

Workers put the bottles with carton on the operation table. After placing then start the button to move and push the material cy

 

Technical parameter

Model: WD-250A

Overall dimension of machine:L5050×W920×H2100mm

Shrink film material: PE film

The thickness of film: 0.03-0.15mm

The temperature of shrinking stove: 160 - 260°,changeable

Producing capacity:18 bags/min

Power: 20Kw

Electric power: 380/220V

Weight: 800Kg

Air motor: 0.75Kw  2 sets 380V, 65W  4 sets  220V

Equipments scheme

AIRTAC Electric parts 1 set

Schneider transducer 1 set

SS heating pipe 12 pieces

The details of machine

Grouping bottles alignment template. Transport the directly to the end, changes the materials easily, high efficiency, and high stability.

 

The operation of machine

Workers put the bottles with carton on the operation table. After placing then start the button to move and push the material cylinder. The packaged material will be sent into the cutting and sealing machine. After cutting and sealing, the carrier devices will send the material into hot shrinking stove to shrink the film which cover the bottles and carton, then cool it. and from the cooling conveyor belt to the stock. When the first package was sent to shrink, at the same time workers can place the second package to push material to cut and seal. Repeat the first packet of the cycle processes.

Two main parts:

1 semiautomatic cover cut and seal film machine

It can cover a film to the material and cut the film and seal it.

2 semiautomatic hot shrinking and cool device

It can shrink PE film at a high temperature and cool material.