8P8C RJ45 Jack to RCA Stereo RGB and S-Video A/V Adapter

ADR2N / ADR3N / ADRSN /ADMSN / ADRGN

§ PRODUCT FACT

The A/V adapter is designed for the analog transmission via patch cord at structured

follow-up after horizontal cabling.

♦ ADR2N includes2 standard RCA jacks(all foraudio) on the front side and 1 RJ45 jack

    on the reverse side.

♦ ADR3N includes3 standard RCA jacks(1 for video, 2 foraudio) on the front side and 1

    RJ45 jack on the reverse side.

♦ ADRSN includes2 standard RCA jacks(all foraudio) and 1 S-Video jack on the front side

    and 1 RJ45 jack on the reverse side.

♦ ADMSN includes1 3.5mm mini-phone jack (for stereoaudio) & S-Video jack(for video)

    on the front side and 1 RJ45 jack on the reverseside.

♦ ADRGN includes3 standard RCA jacks(all for video) on the front side and 1 RJ45 jack

    on the reverse side.

All of them are standard jacks. The patch cord is needed using Category 5e UTP cable or

higher. These adapters must be used in pairs. Connections made by pushing the cable's plug

into the jack on the device. Admittedly, yellow RCA for composite video, red RCA for the right

channel, white RCA for the left channel of stereo audio, S-Video jack for composite video and

3.5mm mini-phone jack for stereo audio. You can use single port video/audio in the same

channel. These adapters are ideal for corporate Audio/Video, schools, home theater and most

of any other situation involving structured A/V distribution signals via Cat.5e UTP cable.

§ FEATURE

-Simplicity of maintenance design.

-Adaptable to all audio, video services and data.

-Compliant with residential and commercial cabling standard.

-Plastic housing with snap on cover.

-Low cost and versatile cabling solution.

§ SPECIFICATIONS

 § APPLICATION

**Note: Some speakers cannot be connected via 3.5mm mini-phone jack,

              in this situation an amplifier is recommended.

§ ORDERING INFORMATION