Contact Platform Support
Help CenterFiber Optic Microscope
Related Products
fiber optic microscope
Thank you forpurchasing the Fiber Microscope.This instrument was designed to provide years of
Service while delivering true optical performance. The instrument is available in any of 5 magnifications(200x.400x.or 500x),and canbe purchased with a universal 2.5mm
And 1.25mm ferrule adapter or system you've purchased,this manual will help you through operation & maintenance.
Setup
The Fiber Microscope comes fully assembled and requires only a few steps before it is readyto use .
1, Begin by removing the instrument from its case.
- 2. You'll need to insert 3AAA batteries .Unscrew and remove the "Battery Cap".Insert the batteries with the "-"side up towards the Battery Plug;"+" side down towards the Light Switch (see Figure 2).Replace the Battery Cap and tighten.
- 3. If you have purchased theFiber Microscope with a Universal Adapter,it should already be in place and your instrument is ready to use.if you purchased an adapter separately,simply screw it into the threaded hole at the opposite end from the light Switch .Your instrument is ready to use.
DO NOT use the fiber microscope to view active fiber signals under ANY circumstances.Active fiber signals contain laser light ,and direct eye contact with laser light should be avoided.The failure to avoid direct eye contact with laser light can result in serious damage to the eye.The Fiber Microscope may magnify the laser light in active fiber signals;direct eye contact with magnified laser light should be avoided.Laser safety filters,as used on the Fiber Microscope,are no substitute for practicing good laser safety.If you are unfamiliar with laser safety practices,seek out professional training .There are many capable trainers working in thefiber optic field who can help.
Operation
In this manual ,we will explain general use of the Fiber Microscope .However,it is important to read the specific termination instructions published by the manufacturer of the connector you are using.This will ensure proper termination.Also,be sure you have read the User Safety Warning and fully understand that direct eye contact with laser light and magnified laser light should be avoided.
1, Begin by loading the polished connector into the adapter .If you have purchased our Universal
Adapter ,simply slide the connector ferrule(2.5mm)into the hole until you feel it hit a stop (see figure3).it may require a little pressure to get it started as our Universal adapter is equipped with a no-slip gripping mechanism.it is important to slide the connector ferrule allthe way to the stop.This will minimize any refocusing thatneeds to be done when changing from one connector to the next .if you have purchased one of the dedicated adapters,insert the connector just as you would into a patch bay or mated connector.
-
2. Now turn the light on.The light operates by pressing and holding the light Switch in .You can tell if the light is on bychecking the "Backlight Window"(see figure1). Ifyou see light through this window ,you are ready to work .
- 3. Once the connector is loaded and the light is on,hold the eyepiece up to your eye and begin focusing.Unlike many instruments of this type,the Fiber Microscope isalways centered so there is no
alignment to be done .Grip the focusing adjustment(brass wheel with rubber grip,see figure#1) and turn it to
focus the image.The first time you use the microscope ,it to focus the image.The first time you use the microscope ,itmay take a little longer to find the image .Once you find the image ,very little re-focusing is necessary if the connector is properly loaded.
- 4. Once you can visualize the connector ferrule ,you can evaluate it for polish quality,cleave quality ,and cleanliness optionally,you can hold the opposite end of a cable to the Backlight window to give further contrast to the core .Check with the manufacturer of your connector for further instructions.
Changing the Lamp
1, This microscope utilizes a white LED light source .The LED has a stated lamp life of over 100,000 hours .Therefore ,you should never have to change the lamp .if you have problems with illumination,please call your sales person to arrange forrepair.
one piece in a plastic bag
Several boxes then packed in a 54*39*35 carton paper box
other size carton is available too.
Shipped in 3 days after payment
We offer the sincere dedicated service!
Before Sale:
detailed products test report
related specifications
During Cooperation:
OEM Service Offered
Design Service Offered
Buyer Label Offered
After Sale:
Any problems on the product, please contact us
OMC industry co., limited, which was founded by an expert team, has been exporting FTTX passive products since 2007. We focus on providing innovative and integrated FTTX solutions for a variety of applications/Networks. Our capabilities include product/solution design, development, enhancement and integration. Our products are among the highest performing in the industry and truly represent the best values in the industry. We also offer training, pre and post-sales support. We help you select the right products for your Optical network’s needs.
Quality is life of OMC. Our firm commitment is to deliver world class product to our customers and forever exceed their expectations. We also offer Solid after sales support i.e. 3 years product warranty under no conditions
OMC treat our customers, suppliers, and employees as our respectable partners. We very happy to share our success with them. Offering best products to our customers, Long-term/Loyal partnership to our supplier and good salary/welfare to our employees. OMC also spare no effort to care our society and environment. With a grateful heart, OMC will go firmly to the bright way that we are longing for.
We hereby gather in OMC, with plentiful passion and professional techniques to service customers all over the world.
1. Can I get some samples ?
Yes, Sample order is available for quality check and market test .And you just to pay the express cost.
2. What's your payment terms ?
We usually accept all these kinds of payment terms .Such as T/T, Western Union.Cash Etc.
3. What's the delivery time ?
It usually takes about 3-7 working days .
Send Inquiry to This Supplier
You May Also Like
-
Clean Room TelephoneUS$ 140 - 160MOQ: 1 Piece
-
Hot Sale Hdpe 40/33 Pipe for Fiber Optic CableUS$ 0.63 - 0.98MOQ: 30000 Meters
-
S42024-L5101-A120-02 Control Rectifier Switch Service BoardUS$ 100 - 3,000MOQ: 1 Piece
-
FC-FC Fiber Optic Patch CordUS$ 1.12 - 2.6MOQ: 10 Pieces
-
Anritsu Site Master S331L PROMOTION PriceNegotiableMOQ: 1 Set
-
Strong Controllability 1310 Nm/1550 nm Wavelength FTTH Optical Receiver With Double WavelengthUS$ 10 - 50MOQ: 1 Set
-
Just for You Fiber Optics Light Up Paper Bag Vase, Paper Flower VaseNegotiableMOQ: 5000 Pieces
-
CYLINDRICAL MUTINATION PLUGSNegotiableMOQ: 1
-
USB AF-MINI USB 5P-B M Adapter VK2-0055NegotiableMOQ: 5000 Pieces
-
25.6V20Ah LiFePO4 for Communication DevicesNegotiableMOQ: 50 Packs
