Universal Remote Controller

The Instruction of the Programme Switch

ⅠMain technical data

A. power voltage: DC24V

B. center frequency: 433M

C. Code number: 6561

D. Remote control distance≥30m.

E. Contact parameters: 1A 30V/DC, 0.5A 125V/AC, 0.3A 60V/DC

ⅡThe method of usage

Connect the eight-foot core plug of the programme switch with the eight-foot core socket of the connection board. Make sure all the lines connected correctly and then put on the programme switch. When the programme switch is put on for the first time, the door will be locked from both inside and outside.

Pressing on the button of the emmiter, the green light flashes and the corresponding light will be on. (The period of pressing the button should be longer than 0.5 seconds)

If the programme switch is put on after power-off at any time, the automatic door will be locked from both inside and outside.

A. The black line from the program switch is the receiving antennas. It should be far away from metal objects in case information is shielded.

B. The transmitter should avoid crash and water.

C. The installation and the test of the program switch should go after those of the automatic door operator.