Contact Platform Support
Help CenterFCST152 FCST End Stop Microduct Connector Connector for Air Blowing Solution
Related Products
-
FCST152 FCST MicroDuct Connector Endcap for FTTH/FTTX Solution,US$ 1 - 2.5MOQ: 1 Piece -
FCST152 FCST HDPE Microduct End Stop for Fiber Optical Solution,FTTX ProjectUS$ 1 - 2.5MOQ: 1 Piece
-
FCST154 FCST Reducer Connector for Microduct 14/12mmUS$ 0.63 - 1.5MOQ: 1 Piece
-
FCST Reducer Connector for Micro Duct(reducer) Push Fit Reducer ConnectorUS$ 0.63 - 1.5MOQ: 1 Piece
-
FCST13301 FCST Direct Buried Silicon Micro Duct for Air Blown Fiber Unit 32/26mmUS$ 0.88 - 4.68MOQ: 1 Meter
FCST15210 Micro Duct End Cap
Brief Introduction:
To keep Micro Duct networks free of debris, seal the system with Push
Fit End Caps. With the same functionality as the Push-Fit Connectors, installation simply involves pushing the Micro Duct into the End Cap. The End Cap can be attached and removed 10 times while still maintaining the same high performance characteristics.
Push-Fit Micro Duct End Stop Connector operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi).
Product Picture:
Specification:
Model No. |
Part Name |
Blow Pressure |
Pull Strength For HDPE tube |
Pull Strength For LSZH tube |
Life time |
FCST15201 |
3 mm DI end stop |
>18bar |
≥350N |
>150N |
10 Years |
FCST15202 |
4 mm DI end stop |
>18bar |
≥350N |
>150N |
10 Years |
FCST15203 |
5 mm DI end stop |
>18bar |
≥350N |
>150N |
10 Years |
FCST15204 |
6 mm DI end stop |
>18bar |
≥350N |
>150N |
10 Years |
FCST15205 |
7 mm DI end stop |
>18bar |
≥350N |
>150N |
10 Years |
FCST15206 |
8 mm DI end stop |
>18bar |
≥350N |
>150N |
10 Years |
FCST15207 |
10 mm DI end stop |
>18bar |
≥350N |
>150N |
10 Years |
FCST15208 |
12 mm DI end stop |
>18bar |
≥350N |
>150N |
10 Years |
FCST15209 |
14 mm DI end stop |
>18bar |
≥350N |
>150N |
10 Years |
FCST15210 |
16 mm DI end stop |
>18bar |
≥350N |
>150N |
10 Years |
Design Lifetime:
The connector shall meet all performance requirements over a minimum period of 10 years at the normal condition.
Exhibition:
•Packing: By carton
•Shipping: By air. By sea. By TNT. By DHL.By UPS etc.
ODM,Product training,FTTH solution consultant,?After?sale?service,Fiber blowing solution consultant, Fiber tools&toolkits consultant
•Production Capacity: We can provide 50,000pcs per week
•R&D department: 10 designer
•The Exhibition experience:ECOC,OFC,NETCOM,Local Exhibition
•Cooperation customers:CMCC,Huawei,Tyco,ZTE,3M, Dura-Mine,GM,MG...
•Transaction Term: EXW,FOB,CNF,CIF
•Payment Term: 100% T/T in advance
Send Inquiry to This Supplier
You May Also Like
-
Clean Room TelephoneUS$ 140 - 160MOQ: 1 Piece
-
Hot Sale Hdpe 40/33 Pipe for Fiber Optic CableUS$ 0.63 - 0.98MOQ: 30000 Meters
-
S42024-L5101-A120-02 Control Rectifier Switch Service BoardUS$ 100 - 3,000MOQ: 1 Piece
-
FC-FC Fiber Optic Patch CordUS$ 1.12 - 2.6MOQ: 10 Pieces
-
Cctv to ip Converter Cctv to tv ConverterUS$ 1 - 100MOQ: 1 Pair
-
Anritsu Site Master S331L PROMOTION PriceNegotiableMOQ: 1 Set
-
Strong Controllability 1310 Nm/1550 nm Wavelength FTTH Optical Receiver With Double WavelengthUS$ 10 - 50MOQ: 1 Set
-
Just for You Fiber Optics Light Up Paper Bag Vase, Paper Flower VaseNegotiableMOQ: 5000 Pieces
-
CYLINDRICAL MUTINATION PLUGSNegotiableMOQ: 1
-
USB AF-MINI USB 5P-B M Adapter VK2-0055NegotiableMOQ: 5000 Pieces
