best price and high quality engineer /natural wood veneer for decoration made from LULIGROUP China manufacture

1.PRODUCTS DETAILS:

2. PRODUCTION PROCESS:

Log Selection
EV is generally produced from Chinese Poplar logs, grown locally either by local co-operatives,
or in registered plantation areas. The light natural colour and soft grain definition of Poplar makes it wellsuited to the production of EV. The process of converting timber into EV starts with the selection of logs, following which they are bought to the mill for processing. The timber is trimmed, sawn to length and debarked. The logs are now ready to be peeled.

Peeling of the Logs
The logs are mounted onto a giant lathe. Within minutes the logs are peeled into rotary veneers. This is achieved by pressing a rotating log towards a large blade, thinly peeling a continuous sheet of veneer off the log. The veneer is dried, stacked and then graded. It is now ready to be dyed.

Drying
EV veneers can be dryed to a consistent colour to suit the market requirement. The raw veneer leaves are stacked into a stainless steel cage. Once completely loaded, the stainless steel cage is immersed into a pressurized, heated vat that is filled with water soluble dry. This system ensures that each leaf is given the correct amount of time to allow the dry to completely penetrate each individual leaf of veneer. Once the desired colour has been achieved, the leaves are unloaded from the vat, dried and given a final inspection before going to the gluing stage.

Gluing
The gluing process is critical for the performance of the finished product. A layer of glue goes between each leaf of veneer, to bond the leave of veneer together. Once the stack has been laid up it is then put into a high pressure press to bond the leaves together, creating a large rectangular block.

Slicing of the Block
The block in now ready to be sliced into veneer leaves. Once the block has been produced, it is turned through 90 degrees, to present the end grain, then mounted to the slicing unit. The blade now runs across the end grain of the block, slicing thickness controlled leaves of veneer. The veneer leaves that are produced are approximately 0.4mm thick, and in 2440 x 1220 format. The veneer is now ready to be used as face veneer for Eucalyptus and Poplar core plywood products.

3. GOODS PHOTOS:

4. usage:

5.Packing:

6.OUR FACTORY:

7.Certification

8.delivery:

9.FAQ

Question 1 : Are you factory or trading company?

Answer :  We are Luli Group, there are more than 9000 employees in whole company, the main products is steel / wood / paper. We have our own produce line.

Question 2 : What is your website?

Answer: 

Question 3 : Where is main market?

Answer: Actually we export products to all over the world. No matter where you are, we can offer you good products and competitive price & best service.

Question 4 : Where is you company?

Answer: We locate in Houzhen,Shouguang city, Shandong province,China.

Question 5 :Which airport is nearest to your factory?

 Answer: There are three airport is near our factory: A.Weifang airport, it’s about one hour to our foctory. B. Qingdao and Jinan airport, it take about 2 hours to our factory.

Question 6: What is your delivery time and payment term?

Answer: Delivery time about 15 days after your deposit or L/C at sight

Payment term: T/T or L/C at sight.

Queation 7: What kind of certificates do you have?

Answer:We have CE, CABR P2, FSC,ISO9001,ISO14001.

10.Contact with us: