factory galvanized iron wire

factory galvanized iron wire          detials

Galvanized iron wire: Hot-dip galvanized iron wire, Electro galvanized iron wire (in big coil small coil/roll)

1)Hot-dip galvanized iron wire

Hot-dip galvanized iron wire is made with choice low carbon steel wire, through wire drawing, acid washing and rust removing, annealing and coiling. It’s mainly used in construction, handicrafts, woven wire mesh, express way fencing mesh, packaging of products and other daily uses.

Size range: BWG 8-BWG 22

Zinc coat: 30-280g/m2

Tensile strength: 350-550N/mm2

Elongation: 10%

Packing: 1-1000kgs/coil, coil with plastic cloth inside and hessian outside or weave outside

2)Electro galvanized iron wire

Electro galvanized iron wire is made with choice mild steel, through wire drawing, wire galvanizing and other processes. Electro galvanized iron wire has the characteristics of thick zinc coating, good corrosion resistance, firm zinc coating, etc. It’s mainly used in construction, express way fencing, binding of flowers and wire mesh weaving.

Size range: BWG 8-BWG 22, we can also offer BWG 8-BWG 28

Zinc coat: 10-25g/m2

Tensile strength: 350-550N/mm2

Elongation: 10%

Packing: 1-1000kgs/coil, coil with plastic film inside and hessian cloth outside or weave cloth outside

factory galvanized iron wire       features and usage

Features of galvanized iron wire:

1>This kind of galvanized iron wire is made with choice mild steel,through wire drawing,wire galvanizing and other processes.

2>Galvanized iron wire has the characteristics of thick zinc coating,good corrosion resistance,firm zinc coating etc.

Application of galvanized iron wire:

1>Galvanized iron wire is mainly used in construction as binding wire,express way fencing as fencing wire,binding of flowers as wire ties in the garden and yard,wire mesh making as weaving wires.

2>Galvanized iron wire is also widely used in chemical equipment,oil processing,marine exploration,metalstructure,electricity,ship building,wire mesh,arts and crafts,metal hose,and other industries.

3>It's adopted in agriculture such as pesticides,sprinkler irrigation,greenhouse and in construction such as water and gas transmission,wire casing,scaffolding,bridge,highway guardrail,etc.

factory galvanized iron wire         making process

The type of wire rod is Q195, element composition is as follows:C≤0.07; S≤0.023; Si≤0.09; Mn≤0.32; P≤0.025.Because This type of wire rod has less Impurities, Q195 is fit for drawing. The diameter is 6.5mm. Generally, Daily output is 120 tons.(electro and hot-dipped are separately 60 tons)

Galvanized wire's first stage is drawing.

there are two kinds of drawing machine: powder drawing and water drawing. powder drawing is fit for junior drawing(6.5mm~4.0mm). One powder drawing machine has 4 tanks and 4 molds. One tank is matched with a mold. Each of them are offered energy by a electromotor. 0.9mm(max)can be "eat" when the wire cross a mold. There are no loss of weight during drawing.

Water draw is used for senior draw.(≤4.0mm)The container is filled with water, soap and 8 molds. Compared with powder draw, water draw can save lots of room and the wire cannot be broken.

After drawing, the wire is thinner, but also very hard. The tensile strength is about 700N. These wire can be used to produce nail and mesh panel. For galvanized wire, it still need annealing

Galvanized wire's second stage is anneal.

Anneal is to low the tensile strength of wire. The stove is solid and built with red bricks. The architecture of anneal stove is cuboid. Different thickness of wire require different temperature. Range is from 700°C to 900°C. Output of the anneal stove, the tensile strength is 400N~600N.

Galvanized wire's third stage is chlorhydric acid washing.

After the draw and anneal, the wire is thinner, softer but also much more dirty. It needs chlorhydric acid washing to remove the impurities. Chlorhydric acid washing requires water pool and chlorhydric acid pool. The density of chlorhydric acid is 17%. In the Chlorhydric acid pool, there is a caldron used for the emission of vapor.

Galvanized wire's fourth stage: Zinc coating

After the chlorhydric acid pool, water pool is also necessary.

factory galvanized iron wire        packing :

1.25kg/roll or 50kg/roll or according to customers

2.plastic film inside and woven bags outside

3.plastic film inside and gunny bags outside

4.according to customers requirement

                1> Plastic fim with hessian cloth ,500g 7kg, 8kg ,20kg,25kg,50kg... 

                   2> Plastic fim with weave bag ,500g 7kg, 8kg ,20kg,25kg,50kg...

                                    3>Small coils wire:1kg per roll , 20 rolls per carton

                                             4> Big coils wire 100kg-800kg per roll

  factory galvanized iron wire     

1.24 hours service will be always available.

2.We will try our best to find a lowest freight cost for customers' reference.

3.The third party inspection always gets real and true data from us and we will send production photos to customers if there is no inspection.

4.Do our best to help customer arrange the shipment and customs clearance.

5.Installation,maintenance and repair instructions with full information.

6.3-8 years warranty depends to different products.

7.Accept changing or refunding if the products cannot be installed rightly.

1) We are local manufactory---price are much competitive.

2) We have done international business for more than 20 years-- high reputation in worldwide.

3) We adhere to the operational theme of “good Quality , high Credibility and best Service".

AnPing Yedi Hardware Wire Mesh Co.,Ltd. established in 2000,is a large enterprise which specialize in manufacturing and selling various of metal wire mesh and wire mesh products. It is famous Wire Mesh Land of China .

contact person :army wang

wechat:wangzhaoqian110

qq:1107278679

skype:wang.zhaoqian

factory galvanized iron wire