Multifunctional Digital Video Fiber Optic Transmission System
Specifications
1.digital video Fiber optic transmission system2.2-ch video,1-ch audio,4-ch switch,1-ch Ethernet
3.FC/PC
4.SM MM
5.FCC CE
Product name: Multifunctional digital video Fiber optic transmission system
Product category: digital video fiber optic transmission system
Product introduction
1. Overview
HC1002M adopts the latest optical communication technology, and makes 2-channel positive-going video, 1-channel bidirectional audio, 4-channel sync switch, and 1-channel Ethernet multiplexed over a fiber transmission; video signal compatible with PAL, NTSC and SECAM formats. Easy installation, without any adjustment to the work; could transmit signals of video, audio, data and Ethernet up to 100km above. Now it is widely used in radio and television transmission, video surveillance, railway/highway monitoring, security, video conferencing and other fields.
2. Features
« 2-channel forward video, 1-channel bidirectional audio, 4-channel sync switch, and 1-channel Ethernet over a single fiber
« 10-bit digital video encoding and uncompressed transmission technology
« 24-bit digital audio encoding
« RS-422, RS-485 (full/half duplex), and other data signal formats and Manchester
« Video AGC (Automatic Gain Control) to provide greater flexibility and more stable image
« Strictly selection material and quality control in order to ensure high quality and high reliability
« Compatible with PAL, NTSC and SECAM video quality control system
« System status could be monitored by the power and other parameters LED indicator
« SMT Surface Mount Technology
« 1U rack mount, 4U rack mount and stand-alone
« Lower power consumption and free installation, debugging
3. Specifications
a) Video
Channel: 2
Video format: PAL/NTSC
Input level: :0.5~2Vpp
Output level: 1Vp-p
Bandwidth (-3 dB):8 MHz
Digital bits wide: 10-bit
Differential gain: ≤1.5%
Differential phase: ≤1°
Weighted SNR: ≥63 Db
Connector: BNC 75Ω
b) Audio
Channel: 1 (bi-directional)
Input/output level: 2Vp-p max
Total harmonic distortion: ≤1%
Bandwidth (-3 dB):20~15 KHz
Audio encoding: 24-bit
Input/output impedance: 100KΩ (600Ω optional)
Weighted SNR: ≥70 Db
Connector: Terminal Block with Screw Clamps
c) Data
Channel: 3 max (0~2 optional)
Data format: RS-232, RS-422, RS-485 (full/half duplex) and support NRZ, RZI and Manchester
Mode: Full/half duplex
Connector: wire connecting terminal
d) Switch
Channel: 4 (in direction of video)
Input: Dry contact
Output: Dry contact
Contact capacity: 1A at 30 VDC
Connector: phoenix terminal
e) Optics
Wavelength: 1310/1550nm
Type: SM
Max. Link loss: 12dB
Output power: –5 ~ –10dBm
Receiver sensitivity: -24dBm (other optional)
Connector: FC/PC (SC or ST)
f) Ethernet
Data rate: 10/100Mbps
RJ45 Port: UTP-100-ohm Cat.5 cable
Standard: IEEE802.3u, IEEE802.3x
g) Power and environmental indicator
Stand-alone power: 6W
Insertion power: 6W
Power adapter: 220VAC to 12VDC/1A
Operating temperature: -40°C to +70°C
Relative humidity: < 95% ((non-condensing)
4. Applications
Green city, highway and subway full control, RS-422 or RS-485 full/half-duplex control of PTZ, communication transmission, access control system, fire alarm system, intelligent building etc…
Send Inquiry to This Supplier
You May Also Like
-
8 Channel Digital Video ServerNegotiableMOQ: 1 Pair
-
8 Channel Video ConverterNegotiableMOQ: 1 Pair
-
8 Channel Video Optical EquipmentUS$ 100 - 150MOQ: 1 Pair
-
16 ch Digital Video Transmission Over FiberUS$ 200 - 250MOQ: 1 Pair
-
Video Fiber Covnerter/video Optical TransceiverUS$ 200 - 250MOQ: 1 Pair
-
16 ch Digital Video Optical Fiber Transmission SystemUS$ 200 - 250MOQ: 1 Pair
-
16 ch Digital Video SurveillanceUS$ 200 - 250MOQ: 1 Pair
-
16 ch Large-capacity Digital Video Optical TransceiverUS$ 200 - 250MOQ: 1 Pair
-
Rackmount for 16-ch VGA Fiber ExtenderUS$ 200 - 250MOQ: 1 Pair
-
16 ch Large-capacity Digital Video Fiber Optic Transmission SystemUS$ 200 - 250MOQ: 1 Pair