Car Head Up Display , GPS HUD support plug and play , HUD XY-HUD

DualScan head-up display ( Head Up Display ), hereinafter referred to as HUD, is widely used in aircraft flight auxiliary apparatus. As the mean pilots do not need to be able to see him down important information. HUD appears the earliest in * * aircraft, reduce pilot looked down meter frequency, avoid attention disruption and loss on state of consciousness ( Situation Awareness ) master. Because the HUD convenience and can improve the flight safety, aviation machine also in succession follow-up installation. Part of the car industry is also similar to the device as a means of marketing to attract customers, but are not widely used.

Vehicle running at a high speed, especially at night when travelling at high speed, if the driver down to view the instrument display or viewing stereo display, front in an emergency is possible because the time to take effective measures and cause an accident. To prevent this from happening, a few models equipped with BVR head-up display ( HUD ) system, it can be the information displayed on the front windshield of the driver level range, and the display position, the display brightness is adjustable. BVR head-up display ( HUD ) system is also called the head-up display instrument.

1. Display speed of vehicle in KM/H or MPH.
2. Overspeed waring.
3. Plug and play via cigar jack, no professional installation is needed.
4. Use GPS signal, requires no wiring to the VSS (vehicle speed signal), suitable for any vehicles.
5. Displays vehicle's speed data received from 8 optiomal GPS satellites.
6. Brightness will auto adjust, you will have a clearly seen day and night.
7. Can connect an external antenna to enhanced GPS signal (contained in the product, Value $10). The HUD will works perfectly with the antenna, fast locate and more stable. Placed the antenna where no metal covers.

Packing include:
1x HUD
1x Power Cable
1x User Manual
1x Reflective film
1x Stool with 3M double-sided adhesive

Installation and Commissioning:
1.Turn on the power and try to find the optimal positions to place the screen and reflective film,
and then shut down the power.
2.Attach the reflective film.the attachment of reflective film is similiar with attachment of the heat-resistant
paper/Remove the protective film on the reflective film carefully and wet the reflective film and inside of
the front winshield with soap water,then attach the reflective film to right place.Rub away the excessive
water by rubber scraper.Do not leave wrinkles,bubbies or fingerprint on the reflective film.
3.Turn on the power again and try to find the optimal angle to place the screen.The correct angle is when
the projection on the front windshield brightest and the display screen darkest while looking steadily at the screen.
4.If the angle of the instrumentation console is not good,the foot stool can be adjusted to obtain the required angle.This stool can be rotated at 360°.
5.Fix the display screen with the 3M double-sided adhesive supplied with the device.

Note:
Push RED button at power connector to get the IGN Voltage, then switch on the HUD device.
Working Voltage: 9-28 Vdc.
Operation temperature: -20C to 85C
Power Consumption: 100mA(typ.)
The GPS HUD uses GPS to determine the true speed of the vehicle. You can fine tune or adjust speed to your personal preference above the Vehicle Speedometer. Default set at + 5KM/h.
GPS signal can be disturb by some atmospheric reasons, & usually signal is weak under the trees, high buildings, mountains, continuous bridges, or interference from other signals... all GPS device do have similar problem.
GPS HUD Signal receiving takes around 40 Seconds to 4 minutes Cold Start after installation; and warm start around 10 Seconds to 1 minute while driving.
***A Read Me First has Added in Package to Aid the Factory Instruction Sheet. Welcome any comments to Improve product and/or instructions.

We are the professional car HUD display system supplier with 9 years experience. 

We have offered excellent OEM ODM service for world famous brands.

Please send your details request  (HUD size,display colors,GPS/OBDII connection,range of over speed warning,other driving informations to show...)
And then we could offer you the best solutions.

Welcomes All Customers Vistor Our Factory and Happy to do Business with all overseas
Note:We have strict producing process, aging test and QC to make sure high quality production.
We have established systematic production standard in waterproof,shockproof,temperature resistance,
humidity resistance,high definition.

competitive advantage 
1.Stable quality (CE FCC ROHS)
2.Most competitive price
3.On time delivery
4.Good aftersales service
5.All products must test one by one wartproof resistance and high/low temperature resistance
6.Warranty:16months
7.OEM,ODM welcome

Guangzhou X&Y Electronics Co., Ltd. was established in Guangzhou in 2005. We are a hi-tech enterprise engaged in the R&D, production, and sale of car camera system,car DVR camera.We guarantee punctual delivery, competitive price and prompt response. We welcome your inquiries and look forward to establishing long-term business relationships with you in the near future.