5-Axis Intersection Line CNC Cutting Machine for Metal pipe & tube Diameter 30-600 mm

5-Axis Intersection Line CNC Cutting Machine for Metal pipe & tube Diameter 30-600 mm

Technical parameters

CNC control system

Using Ruiduncnc industrial control computer configuration, pentium grade Microprocessor, frequency 2.8GHZ, 512M memory, 160G hard disk, USB interface and 10.4 Color LCD monitor.

• A, CNC control mode.
• B, Schneider imported original all-digital AC servo motor and high-precision drive.
• C, Plasma power : Ruiduncnc made in Germany( or as customer demand)

Machnical system

• 1) linear motion that plasma or flame torch makes along unprocessed tube axis (Ⅰaxis -X-axis): servo motor drives longitudinal bracket by reducer to move the torch head and torch on the longitudinal rails.
• 2) Lifting motion of plasma or flame torch (Ⅱ axis -z axis): servo motor pushes torch head and its torch through reducer to realize the lifting motion.
• 3) Jigging motion that plasma or flame torch makes along unprocessed tube axis (Ⅲ axis - A-axis): servo motor drives torch head and its torch through reducer to turn round.
• 4) Jigging motion that plasma or flame torch makes along the vertical of unprocessed tube axis: servo motor drives torch head and its torch through reducer to turn round.
• 5) Rotary motion of unprocessed tube(V axis-W axis): servo motor drives chucks to make steel tube to make rotary motion.
• 6) Reducer adopted high precision planetary gear, to ensure high precision of transmission
• 7) Tube supporter adopted hand-cranked movable wheel frame with adjustable height of center .   5-Axis Intersection Line Cutting Machine for Metal pipe & tube Diameter 30-600 mm

Main functions of the system

• 1.Pipe cut anywhere, straight mouth or bevel
• 2.Pipe anywhere orthogonal, oblique, eccentric combinations of curves intersecting hole nesting program.
• 3.Pipe anywhere orthogonal, oblique, eccentric intersection curve straight and bevel cutting.
• 4.Parameterized type of intersection curve Gallery.
• 5.Fully-automated cutting process
• 6.Simulations and cutting process synchronization display.
• 7.Kerf automatic compensation
• 8.Pause, continue to cut and the cutting process acceleration/deceleration control.
• 9.Automatic arc,automatic perforation, automatic height-adjustment
• 10.Midway breakpoint site protected memory
• 11.Each control shaft automatic location.
• 12.Working process of automatic fault diagnosis and alarm.  5-Axis Intersection Line Cutting Machine for Metal pipe & tube Diameter 30-600 mm

Application area

To be used to cut thick tube and pipe of carbon steel(flame),stainless steel, alloy steel, aluminum, and other metal materials, applied in areas including ship building, pressure vessel, aerospace, bridge construction, steel structure , electronic power and engineering machinery.

Gas circuit system

Pneumatic solenoid valve device using Italy, Taiwan brand valves, high quality composition and gas lines. According to oxygen, gas cutting characteristics, advantages of integrated pneumatic system design of the same industry, Automatic gas path system for fast preheating, perforation, automatic conversion of high efficiency and energy saving and other high energy-efficient requirements.

• 5.1 Gas circuit system for the central gas gathering form, controlled by gas circuit dashboard.
• 5.2 Plasma using arc voltage height controller automatically adjusts the torch height to ensure the safe and efficient when cutting.
• 5.3 Gas circuit system with automatic conversion of high and low pressure, backfire prevention functions, ensuring safe and efficient cutting.

Working Environment

• 6.1.Plasma required compressed air not less than 0.8MP.
• 6.2.Temperature : -5°C ~45°C
• 6.3 Relative humidity : ≤0.95

Packages

Packaging of the device, packaging is suitable for long distance transportation, rust-proof, moisture-proof, shock-proof, suitable for lifting.

Cutting samples

Video link :  /watch?v=2ezhqufzn8Y  

FAQ : 

Guangzhou Aoling CNC Cutting Machine
Thank you for so much attention, your enquiry is appreciated!

Your information required:
1.The size of your plate
2.The thickness of your plate
3.The material of your plate

Our terms:
1.price terms: FOB Guangzhou Or CIF your port
2.Payment terms: 30% TT deposit,the balance 70% before shippment
3.Delivery time:10-20days after getting the deposit.  5-Axis Intersection Line Cutting Machine for Metal pipe & tube Diameter 30-600 mm