UL 2468 pvc 4 pin wire

                                               UL 2468 pvc 4 pin wire

Rating                80°C, 300 Volts.

______________________________________________________________________________

Conductor                  2-150, Nos. 32-16 AWG.  Tinned or bare, solid or stranded

                            copper, conductors laid parallel and in one plane.  Same

                            or mixed AWG.

______________________________________________________________________________

*Insulation                 Each conductor has a nominal 15 mils wall or heavier

                            thermoplastic (PVC).  This forms a flat cable with a

                            single row of conductors having a 1/2 in. maximum width

                            web between insulated conductors.  The nominal and minimum

                            insulation thickness along the ripped edges for each

                            conductor shall be 15 and 13 mils, respectively.

______________________________________________________________________________

Shield                 Optional.

______________________________________________________________________________

Covering            (Optional) PVC, 5 mils min. at any point 80 mils max.

______________________________________________________________________________

Standard            Appliance Wiring Material UL 758.

______________________________________________________________________________

Instructions      Detailed Examination.

*to UL                Tensile Strength and Elongation of Insulation.

*Representative        Spark Test.

______________________________________________________________________________

UL                       (4)  Detailed Examination.

*Counter-Check        (4)  Tensile Strength and Elongation of Insulation.

Program             (4)  Heat Shock.

                            (4)  Cold Bend.

                            (4)  Deformation.

                            (12) Horizontal Flame Test.

______________________________________________________________________________

Marking             General.

______________________________________________________________________________

Use                     Internal wiring of Appliances; or internal wiring of

                            Appliances where exposed to oil at a tempera­ture not

                            exceeding 60°C or 80°C, whichever is applicable. 

Colors: white, blue, red, black, brown, yellow, green, transparent, yellow/green, etc...