magnetic key door lock

magnetic key door lock     

Magnetic Door Lock System
--1200 lbs holding force
--fail safe
--with LED
--easy to operate

500kg(1200lbs) Holding Force LED magnetic door lock system

instruction:

A. 12VDC Input

Required power 0.5Amp(Minimum)

Connect the positive(+) lead from a 12VDC power source

Connect the ground(-) lead from a 12VDC power source

Check jumper for 12VDC operation

B.24VDC Input

Require power 0.25 Amp(minimum)

Connect the positive (+)lead from a 24 VDC power source

Connect the ground (-) lead from a 24VDC power source

Check jumper for 24VDC operation

C. Contacts

Relay dry contacts are rates 1 Amp at 24VDC for safe operation, do not exceed this ratiing.

If you require a normally open switch, connect the wires from the system to C and NO.

If you require a normally closed switch, connect the wires from the system to C and NC.

Important!

If power switch is not wired beteen DC sorce voltage and magnet, it will take a longer time to de-energize the magnet simulating residual magnetism.

magnetic key door lock  

CONTACT US 

Mandy

OEM Service                                                             

80% of our products are OEM ,which means products are delivered with customer’s brand .We have worked for Hisilicon ,Sony, Samsung ,Blue Iris ,Geovision ,etc.

We make customers’ brand or logo on products , user manual ,software ,label and make special packing box for customer.

If you have OEM order for high quality cctv and access control products ,We are the best choice for you.

Certifications                                           

About US