The product is a mixture consisting of polyether polyols, silicone stabilizer, flame retardant and catalys. It is a light yellow liquid at room temperature. It has been developed to produce B1 class fireproof outer wall spraying thermal insulation polyurethane foam in conjunction with polymeric MDI.

SPC-1007 series polyol is a fully formulated polyol blend developed for spray application of polyurethane rigid foam. The component ratio of has been adjusted to make it suitable for polyurethane foam spraying machine using with a fixed volumetric component ratio of 1-1.2 : 1.

It already contains sufficient quantity of blowing agent HCFC 141b to achieve the foreseen foam density.

Typical properties of spray foam insulation:

High closed-cell rate, good water-proof

Good thermal insulation

High compressive strength

Component of spray foam insulation:

Component B: isocyanate

First aid for eyes & skin for spray foam :

When working, please avoid contact of polyol with eyes or skin. Safety glasses are suggested. Skin contaminated with polyols should be washed with soap and plenty of water. If polyol contacts eyes, flush with plenty of low pressure flowing water and get medical attention.

When SPC-1007 polyol and isocyanate (mdi) are mixed together using suitable foam spray equipment, the resulting foam has a homogenous density. Foams which are allowed to cure for a sufficient time between the layers applied have good skin formation and show good adhesion to the sprayed surface. Special care must be taken the sprayed surfaces are not cold or wet. It is mainly used for the insulation of wall&roof and cold room & container.

Packaging and shipping

Component A is 220kg/iron drum;

Component B is 250kg/iron drum.

One set: 470 kg=220kg A+250kg B

One 20' container loads 40 sets/80 drums/18.8 tons

single component polyurethane pu foam adhesive glue xps for aluminum

One Component polyurethane pu waterproofing coating material

Polyurethane Foam Sandwich Panneis With Low Price

High Temperature Polyurethane PU Elastomer Vacuum Casting Machine

Polyurethane PU Spray Foam Injection Machine, Spray Filling Machine

China 2016 new continuous pu cold room sandwich panel machine