Dry mortar Tile and Stone Adhesive Redymix 10

 Mova Redymix 10 is a ready-mixed, high quality dry mortar with grade 100#, mixed and packaged at the factory. Ingredients of Mova Redymix 10 are Polymer cement-based mortar, selected sand (removed from toxic impurities such as mud, organic and inorganic impurities) and multi-functional additives. Mova Redymix 10 is very high durable and environmentally friendly, manufactured under the formula studied and developed by laboratories of Mova.

Scope of application:
Mova Redymix 10 is a multifunctional dry mixed Mortar with grade 100#, Used as floor screening, building and plastering on indoor and outdoor walls.

Typical applications:
-    High-storey buildings involving high quality
-    Buildings in use need repaired, restored without stopping its operations.
-    Newly built cultural works such as temples, pagodas, churches, monuments, houses of culture, museums etc...
-    Restore ancient cultural works.
-    Buildings in small alleys, narrow streets in cities and urban areas.

Advantages:
1.     Mova Redymix 10 is measured out, ready-mixed packed on high-automatic production line in accordance with Gernman Technology.
2.     Quality of Mova mortar is assured at the factory and meets national standards: Clean mortar – its durability is  2-3 times higher than traditional mortar.
3.     Easy to use, shortened 1/4 execution time, put to use early: by reducing waiting time between stages, no need to sand screening and decrease 90 % of cleaning time and the process for transporting waste out.
4.    Save 15% of materials as compared to traditional mortar: Mova Redymix is light, only equal to two third of density of traditional mortar. Plastering thickness of Mova is, only equal to two third of traditional mortar and specially Loss rate is insignificant. Reduce over 97% of rate of loss in the use of materials in accordance with allowable loss rate speculated by the State.
Environmentally friendly: The total process from production, transportation to use discharges no waste into the environment. The special features of Polymer cement morter are not to cause shrinkage and shattering to the works during use.

Certificate:
Mova Redymix 10 is certified to match Vietnam standards TCVN 4314:2003

Notes when using
-    Do not mix with any other product
-    In any special case, please contact our technical Department

Warranty:    

-    Warranty period: 10 years by Mova manufacturer.
-    Quality of Mova Wall 500 is regularly inspected by our laboratories.

Specifications:
1.    Compression strength( 28 days) : at least 100 kG/cm2
2.    Density  (kg/m3): 1690 kg/m3 dry.
3. Water requirement: (19-22)% quantity of dry mortar.
4. Thickness of layer:
-    Building: from 7 mm to 10 mm, using solid brick
-  Plastering : from 7 mm to 10 mm
- Spray the floors: Depending on the flatness of the floor and the base.

5. Rate of use
-   About 21kg/1m2/cm thickness.
-  Actual use weight of Mova Redymix 10: 385kg/ 1m3 wall 220.

6. The output:
-     1 ton of  Mova Redymix producing 560 liters of mixed mortar.
-     1 50kg bag producing  28 liters of mixed mortar.

7. Usage range:
-   Outdoor : allow.
-   Indoor: allow.

Rate of use:
-     About 21kg/1m2/cm thickness.
- Actual use weight of Mova Redymix 10: 385kg/ 1m3 wall 220.

Package:
-    Nylon bags of 5kg
-     In moisture-resistant paper bags of 50kg, 40 bags/ Jambo moisture-resistant bags.
-     Jambo bag of 1000 kg.
- In silo automatically pumping and mixing by M- tec mixer, installed at Site.
Storage and preservation:
-    In bag pachage: At least 6 months in unopened package, placed under dry conditions..
-    Stored in Jambo, silo completely protected from air effects.    
-    No other special notes

Safety:
Precautions: Mova Redymix 10 5 is the product originated in cement, alkaline. It is necessary to take appropriate measures to minimize direct contact with skin. If material is splashed into eyes, wash immediately with water and see a doctor immediately.