Mortar for AAC Tile & Stone Adhesive Skim cost AAC

Mova Skimcoat AAC is kind dedicated to brick mortar AAC, have very high adhesion strength and ultra low dosage. Products guarantee no crack, no peeling and high waterproofing capabilities. Mova Skimcoat AAC component adhesive composed of white cement, lime, polymers, aggregates and dry selective multifunctional additives, produced by the formula industry by laboratories and research Mova to develop.

Fields of application:

Mova Skimcoat AAC is used colloidal binder specialized to warrant the adobe brick walls (lightweight concrete bricks AAC / ALC & cement aggregate) with built circuit thickness (3-5) mm in indoor and outdoor areas heaven.

Typical Applications:

- Used brick wall bricks AAC and other lightweight concrete.

- For heavy concrete bricks.

- Used tunnel brick wall.

Advantages compared with traditional mortar:

1. Stucco Mova Skimcoat AAC, excellent adhesion with ultra low dosage.

2. Quality guaranteed Mova mortar factory in Vietnam and standards ISO 7239: 2003 and other international standards equivalent.

Mortar Mova be quantified, premixed and packaged in industrial production line with a high level of automation technology in Germany.

3. Clean Mortar harmful impurities - Longevity mortar 2-3 times of traditional crafts:

Mova clean grout mortar has been removed all harmful contaminants such as dirt, organic and inorganic impurities like wood items, garbage ... with a sand in the production process.

4. Save 75% material compared to traditional handmade mortar:

- Plasters Mova proportion Simcoat AAC billion in only 2/3 of traditional mortar

- Consumption super little, only 1/4 of the amount used traditional mortars

- Thickness mortars very thin, only 1/3 the thickness of traditional mortar

- Rate negligible wastage, reduce over 95% the proportion of waste material use permit according to the norms of the State.

- Use a dedicated fly considerable saving materials and construction time.

5. Environmentally friendly:

- The entire process from production and transportation to make use of waste are no environmental pollutants.

Certificate :

    Mova Skimcoat suite AAC Vietnam TCVN 7239 standards: 2003 and other international standards equivalent.

Caution when using:

    Do not add any empty.

    In all special cases, please contact the technical department of us.

Instruction:

Prepare :

a, Walls:

- Wall surfaces must be clean, with no fat oils, mechanical impurities. If walls could smooth before grinding before baits.

- If the old wall, they must clean the old lime paint, anti-mold moss off.

b, Tools

- Boxes, paddle, water, bait table, putty Mova Skimcoat AAC.

Mixing supplies

- Mixing water content: (19-25)% volume. Mix with mixer (also can be mixed by hand).

- Pour water into a small 50-liter mixer as directed, then the flour and mix well Mova Skimcoat AAC into a homogeneous mixture and put into use

AAC Skimcoat Mova construction:

- Use a steel trowel blades mixture desk on the wall.

- Depending on the wall surface and the thickness of baits baits to the appropriate class. Should baits minimum 2 layers, liner before and finish later.

Norms of use:

- Thickness of blades: 1-6mm (depending on the quality of the wall).

- Skimcoat AAC: 1.4 kg / m2 / mm (Usually Skimcoat lining thickness from 2.5 - 4,5mm)

- Skimcoat complete: 1.2 kg / m2 / mm (Usually Skimcoat perfect thickness from 1.0 - 1.5 mm)

Pack:

- In a dedicated silo

- For how Jambo (kind 500kg or 1 ton).

- In kind 40kg paper sacks moisture.

Storage and preservation:

- In which: At least 6 months in conditions which are not open, store in a dry place.

- In leaving the packed Jambo, in silos are fully protected against all the effects of the air.

- No special precautions other

Safe:

    Precautions: Mova Skimcoat AAC is a cement product, so it is alkaline. Take all appropriate measures to minimize direct contact with skin. If material is splashed in eyes, wash immediately with clean water and see a doctor immediately.

Important note:

    The information, especially those instructions related to the construction and use of the MOVA was concluded based on knowledge and experience of MOVA current and applicable for the Mova is inventory properly, handled and applied under normal conditions in the limited lifespan. All violations of this technical guidance, as well as the differences in materials, substrates and actual conditions in the field than those recommended by the manufacturer are not covered in the warranty conditions of Mova .