BSD-50H Injection Blow Molding Machine For Making Plastic Bottle

Product Application

1.Hydraulic system adopt electri-hydraulic hybrid servo system,can save 40% power than usual.

2.Rotation device,ejection device and flipping device adopt lasted servo motor,it can improve the performance stable,solve the problem of oil leak which is caused by the seal aging deterioration.

3.IBM50H clamping cylinder is under rotation table,which advance for mould change&product clean,Open-close mold adopt double horizontal beam and four vertical pull rod

4.Open-close mold adopt assisstant cylinder do the actions,main cylinder purge and lock mould.it can do the action in high stability and speed.Cylinder clamping force ben more balance to improve machine better inflexibility.

5.Melt back pressure is controlled by cnc,can work more covenient and reliable.

Main Features

1,Excellent mechanical strength, impact-resisting, and non-cracking bottle mouth and thread are of precise measurement, enabling 100% close match with the bottle cap.

2,The weight of the product can be preset with consistency.

3,The measurement and thickness of the product can meet the requirements of the design without any deviation. The surface of the bottle mouth and the body is of good luster and smoothness.

4,No rough selvedge will occur at the mouth or bottom of the bottles, which can save raw material.

5,There is no joint seam on the bottom of the bottle; And the strength is improved.

6,The joint seam on the bottle body is smooth.

7,Accord with GMP authentication requirements

The computer part

The electric part

The injection blow molding part