Low Cost Ruim Support Or Non Ruim CDMA Gateway/CDMA FWT

Specifications

Etross-8828 is a CDMA to Analog Converter, the device can produce a FXS line to allow a regular phone to be connected and used just like a local landline(PSTN) except your calls will go out from the CDMA network. This device can both receive and make calls.

2. Technical Specifications

1. Air Interface: CDMA 800/1900Mhz IS-2000(backward IS-95A/B)

                          800Mhz                1900Mhz

1. RF receiving (RX):   869 ~894MHz     1930 MHz ~ 1990 MHz
2. RF transmitting (TX): 824 ~849MHz     1850 MHz ~ 1910 MHz
3. Vocoder: 8K QCELP, EVRC
4. Support: Ruim Support Or Non Ruim support (Optional)
5. Industrial module: Sierra Wireless Module (Qualcomm 3G cdma)
6. Power Consumption: Static ≤25MA      Emission:≤300MA
7. Dialtone frequency: 450Mhz
8. Sensitivity: -104db
9. Ac-Power: Input: 100-240V 50/60Hz ,Outupt: DC12V 1A
10. Connector of Power: US type or European type (Optional)
11. Antenna Gain: 2.5dbi (Short Plastic Antenna), 3.5dbi (Magnetic Antenna with 3m cable)
12. Antenna Connection: SMA
13. Connection Mode: RJ-11 phone jack

3. Features &Functions

1) Simple to install and easy to maintain

2) Steady module and reliable design ensures good performance

3) Provides optimized circuit directly connecting the exchange device for extensions

4) Compatible to most telephones, PBX and VoIP gateways (for call termination)

5) Strong signals with high gain antenna

6) Attractive plastic casing

7) Ruim Support or Non-Ruim support (optional)

8) Caller ID display

9) Provides reversal polarity signal (Voice detecting reverse) for metering

10) No noise and clear voice

11) Suitable for wide voltage range and low power consumption

12) RJ-11 ports (for extensions)

13) Locking PIN / network (optional)