600ml Air Caulking Gun

Specifications

Air Caulking Gun
310ml&400ml&600ml Sealant
Fast flowing air,super regulating valve
Lower noise when working
145Psi,10bar

Air caulking gun

 

Air caulking gun instruction:

 

This epoxy caulking gun is suitable for 310ml,400ml,600ml soft or cartridge sealant.

 
 Professional grade, pneumatic gun for the application and extrusion of seam sealers and adhesives,
such as silicones, poly-urethanes, acrylics, polymers, etc,

 

600ml air caulking gun;

 

cartridge: one component air caulking gun;

capacity:600ml soft packing

material:aluminum and plastic.

Body material: aluminum;

Handle:Steel

Aluminum alloy nut,attached with nozzles for replacement;

Single gun weight:1200g;

pcs/ctn:20pcs;

measurement:54x41x54cm;

G.W:15kg;

N.W:14.5kg;

Best air caulking gun,welcome your visit!

 

 

 

Air Caulking Gun Scope of application(tools):

 

1, general glass assemble,such as glass,window,and door

2, sealing,repairing and bonding the joint of other construction materials,such as aluminum,tile,some plastic and wood

3, other building or industry

 

Suggested Use Materials:

Epoxies, Acrylics, Silicones, Polyesters.

Epoxy Acrylates, Hybrids, Urethanes.

Polysulfides, foams, Polymers, polyureas

 

Air Caulking Gun Operating Instructions:

 After Loading Sealant Pack:

1,Piston Operated Cartridge Applicator

  Remove the front cap.

  Using the cartridge, push the plunger down the barrel until it will go no further.

  Tightly replace the front cap.

 2,Sachet Applicator

   Ensure the desired nozzle is fitted to the front cap.

   Using a new sachet, push the floating plunger down the barrel until it will go no further.

   Cleanly cut off the end of the sachet or crimped clip where present.

   Tightly replace the front cap.

 3,Operation of the trigger:

By pulling the trigger, a cushion of compressed air builds up inside the applicator to initiate the flow of sealant. On releasing the trigger, the sealant flow ceases as the compressed air escapes rapidly by a silenced quick exhaust valve at the rear of the gun..

 

 Air caulking gun caution:

 

1.Always disconnect the air line prior to dismantling the applicator.

2. To ensure trouble-free operation of the applicator, it should be wiped clean of all sealant residue after use with the sealant manufacturers recommended solvent.

3. Front caps should always be secured tightly during use.

4. It is recommended that safety spectacles are worn when using all pneumatic tools.