Mini Orthopedic Electric Drill

Cut all kinds of bandages,like plaster bandage,fiberglass casting tape etc.

Introduction and ApplicationElectronic Plaster Cutting Saw  Plaster of paris plaster cut saw Plaster Cutter Saw plaster cut saw medical electric drill surgical drill

v Double blades electric plaster saw is composed of electric reducer motor, main drive gear, bearing, grease seal, seals, gearbox, anchor screw, stop nuts, protective shrapnel, protective plate, protective seat, protective cap, blade, switch, bettery socket, 24V power adapter, etc.

v It is mainly used in demolishing the orthopedic casting tape or plaster bandage and resetting or renoving. 

System and FeatureE ectronic Plaster Cutting Saw  Plaster of paris plaster cut saw Plaster Cutter Saw plaster cut saw medical electric drill surgical drill

v Double blades electric plaster saw operation is based on the running of reducer motor be pouched by 24V dc power adapter. The gear dives two running axis mobilize two blade into alternative movement, which can realize removing the plaster or casting tape directly without using scissor.

v During the operation, protective plate can protect patient from hurt by blade.

v The drive motor adopted in the 24V dc power, the blades are isolated by protective plate and protective shrapnel, safety of patient and operato can be guaranteen.

v The features of this machine are safe and reliable, strong and powerful, light and handy (suit for women), attractive appearance, operation stability, small vibration and low noise, blade can be used with two sides.

v The outstanding advantage is that it can remove the plaster or casting tape directly, no need to use scissor again.

Work condition and technical parameter  ectronic Plaster Cutting Saw  Plaster of paris plaster cut saw Plaster Cutter Saw plaster cut saw medical electric drill surgical drill

v Normal work condition

    Range of Temperature of environment: 5℃~40℃;

    Range of Relative humidity: ≤ 80%;

    Input voltage:100 ~ 240V

    Output voltage: 24V

    Supply frequency: 50/60HZ

v Basic parameter (No-load)

      a) Rotate speed: 260prm

      b) No- load noise≤ 85dB (A) 

      c) No-load heat up: Below 15 ℃ with 3 minutes running

How to use   ectronic Plaster Cutting Saw  Plaster of paris plaster cut saw Plaster Cutter Saw plaster cut saw medical electric drill surgical drill

v Check whether the saw blades are flat, or teeth broken or correctly installed before using.

 v Unload the protective plate before assemblying the blade, internal blade first, then external one. Turn off the nuts in clockwise sense with the assorted tool. Testing the machine, through the noise and rotated condition adjust the nuts tightness until machine running normally.

 v Disinfect the blade before cutting.

 v Hold the saw tightly and make the saw protective plate inside plaster bandage, and put the protective shrapnel open slowly. Press the swith button and push the saw go  ahead unitl plaster be opened.

 v When the blade work does not efficiently, turn to another side, the operation as first assembly; Notify that do not exchange the internal and external ones.

   Electronic Plaster Cutting Saw  Plaster of paris plaster cut saw Electronic Plaster Cutting Saw  Plaster of paris

Two Kinds of Plaster Cutting Saw We Do   ectronic Plaster Cutting Saw  Plaster of paris plaster cut saw Plaster Cutter Saw plaster cut saw medical electric drill surgical drill

Certificates  ectronic Plaster Cutting Saw  Plaster of paris plaster cut saw Plaster Cutter Saw plaster cut saw medical electric drill surgical drill

Shipment   ectronic Plaster Cutting Saw  Plaster of paris plaster cut saw Plaster Cutter Saw plaster cut saw medical electric drill surgical drill

Welcome to Contact