JP rubber shock absorber parts for electronic instruments to protect the machine from vibration and shock

rubber Buffer Shock Mount Vibration Absorber Vibration Isolator Vibration M damping mounts with galvanised oval base plate   rubber mount for electronic instruments

1. Customized size & color
2. Good air-proofness & heat resistance
3. Hardness: 30~90 shore A  

4. Size: 39*38mm

Isolator widely used in diesel engines (and generators), air compressors, fans, chillers, pumps and other mechanical equipment vibration isolation for forging, stamping machinery vibration isolation is also obvious. Features

1.ZA series isolator isolators and similar compared with the obvious effect of vibration isolation, small size, light weight, high and low, stable performance and low price.

(2) Easy installation: In most occasions when placed directly be isolated between the ground crew (or crew underneath a pedestal), generally do not bolt, and without the traditional concrete foundation, and thus short construction period, low investment, is currently implementing dynamic mechanical vibration the ideal product. Selection and Installation

1. According to the unit disturbance frequency, weight, and support requirements, etc. Select the size and number of isolators, the choice should be to make the machine disturbance frequency and the natural frequency of vibration isolators ratio preferably between 2.5 and 4.5 .

2 isolator arrangement generally respond, said arrangements to ensure that all points of support isolator force uniform.

3 between the isolator and foundation anchor bolts usually not required.

4 units high level requirements, the available shims to adjust, and in the use of two weeks after careful leveling.

The galvanised threaded plate mounted in rubber is 10mm thick and 45mm diameter with an 8mm hole threaded M10

The front of the mounted threaded plate to the back of backing plate is around 41mm

The galvanised oval base plate is 136mm x 95mm x 3mm and 110mm between the hole centres. Each bolt hole is 11.50mm diameter and the internal diameter of the plate hole is 53mm

Finally the rubber is 45 shore and as a guide appears to be 15 or 16mm thick in the walls of the dome

 Advantages:      rubber mount for electronic instruments

Fushiyuan has the widest range of Engine Mounts on the market, with sizes and load capacities to suit all requirements. 

They are designed to be easily installed, and are offered as standard with an integral fail safe device to provide shock and 

failure protection limiting any damage to the application or the Mounts. The Fushiyuan range of Engine Mounts is so large 

that we are able offer replacements inplace of the vast majority of existing mounts that are at the end of their natural working 

life. They are designed for use on engines, generators, machines, pumps, compressors or any other device that requires the 

isolation of vibration from the application, to the position it is secured to. They have a Bell shaped top section, which provides 

a number of key design functions, which includes protection of the Rubber element from chemical/ oil spillages or 

contamination. They also act to spread the load being applied, and finally are a key factor in providing a fail safe functionality. 

To increase their suitabilities for certain applications, we also offer a range of Height Adjuster Kits, which enable the Mounts 

to be assembled and adjusted to suit the specific installation where there are uneven floors. Fushiyuan can also offer a non fail 

safe version of Engine Mount – where costs are the key driver in Mount selection. 

FUSHIYUAN:  

Our company had been founded in 2004,which is located in shenzhen city of China with the advantages of elegant environment and convenient transportation. ,with the area about 1000 square meters, the staff about 100 people, and one member of the shenzhen city rubber profession association member unit.

Why choose Fushiyuan ?----8 Reasons: 

1. Qualification: rubber mount for electronic instruments

We have been in rubber & plastic industry for 9 years, in the past 9 years we accumulated a lot of work experience We have 8 x 200T imported vulcanizer machines, 1 x mixer, 1 x rubber mixing machine, 1 x rubber cutting machine, 2 x punching machines, 1 x vulcanization oven. Together with and well.trained and skilled workers do constitute our assets in this field, years partnership with Alibaba Group,..., these are all solid credibilities to justify your choice of us. rubber feet. 

2.Competitive price: rubber mount for electronic instruments

We collocate materials by ourself instead of buying ready-made material, so the products’ cost is lower then others and our price is competitive.this advantage can help you get order from your clients.

3. Rubber Toy Tyre / Shredded Tyres / Tyre Product Manufacturing Process: rubber mount for electronic instruments

From molding to material preparation through production to quality control till delivery, these are all under our strict control, which means we can ensure perfect quality to supply.

4. Technology and Equipment:  rubber mount for electronic instruments

5. Rubber Toy Tyre / Shredded Tyres / Tyre Product Quality and Service: rubber mount for electronic instruments

6. Rubber Toy Tyre / Shredded Tyres / Tyre Product Color: rubber mount for electronic instruments

For your choice, every kind of color you can think of has been covered: We have veteran technologist in this area to get you exact color as the Panton color cards shows.  

7. Rubber Toy Tyre / Shredded Tyres / Tyre Product Lead Time: rubber mount for electronic instruments

Normally it costs you 10~12 working days for molding and the production around 7 days, but if there's stock available, delivery can be made upon the second your payment has been confirmed. Delayed delivery is by no means our choice.   

8. Our Commitment: rubber mount for electronic instruments

We do hope our customers know products well, so it can make communication easier, as the more buyers know te product, the easier they identify a good product, this makes sure our products can be better understood in aspects of quality and workmanship. In the course of our exchange, both parties can discuss more deeply about product and workmanship and even the whole industry status-quo and its future direction and more.   

Product Manufacturing Process: rubber mount for electronic instruments

1. Product Design
In this phase, all work are based on blueprint from buyers, if there's no such blueprint available, you can show us sample and we help design accordingly for your confirmation; In case both materials are unavailable, just the stuff that the product goes with is ok, we can discuss together to work it out, this won'tharge you anything, we promise. 

2. Open Rubber Toy Tyre / Shredded Tyres / Tyre Product Mold

3. Material Mixing & Color Set
 Designated Panton color numbers or customeroffered color palette, we work out the amount of each ingredient, we're staffed with veterans of over10year experience, they can accurately figure out the constitution of each ingredient and minimize the color distortion. 

4. Figure Out Rubber Toy Tyre / Shredded Tyres / Tyre Product Hardness 

We can ensure you that all our products are based on top grade material, no toxic and incrementally friendly, hardness canbe adjusted as per customer's requirement. 

 
5. Rubber Toy Tyre / Shredded Tyres / Tyre Product Prototyping
Put the previously designed mold into vulcanizer and heat it. After this, modify it, wash it and try prototyping. Process done, set the time frame of multiple prototyping according to weight and size.  
6. Rubber Toy Tyre / Shredded Tyres / Tyre Product Quality Check:

After prototyping, quality checking person checks one item after another according to order requirements so that mass production can be arranged. --shock abosrber

7.  Final Touch, Quality Checking and Packing--shock absober