gabion basket

Specifications

Hexagonal wire mesh as known as chicken netting, 6 corners netting
Material: galvanized wire, PVC coated wire, stainless steel

                                                                                              Welded Gabion mesh 

 

Welded Gabion are manufactured from cold drawn steel wire and strictly conform to

BS1052:1986 for tensile strength. It is then electrically welded together and Hot Dip Galvanised

or Alu-Zinc coated to BS443/EN10244-2, ensuring a longer life. The meshes can then be organic polymer coated to safeguard against corrosion and other weathering effects, especially when the are to be used in salty and highly polluted environments. Our Alu-Zinc* mesh is coated using the Galfan process.

  Lacing wire shall be provided separately for site assembly. Lacing Spirals is  Alu-Zinc and stainless steel C rings are also available at extra cost if required.

   All our Organic Polymer powder coated welded mesh are designed to be equivalent to the requirements of the DETR, HA MCHW, Volume 1 Specification of Highway Works, Clause 626.

  It is composed of welded mesh panel and spring steel lacing wire.

 

 

Features:

 

1. Just fill the stone into the gabions and seal it.
2. Simple installation. No special technology needed.
3. Weather proof under natural destroy, corrosion resistant.
4. Sludge in the stones is good for plant growing. Mixed to form a integrity with the natural environment.
5. Good permeation can prevent the damage by hydrostatic.
6. Less transport freight. It can be folded together for transport and further installation.
7. No collapse even under big scope of deforming.

 

 

Specification: 

 

Corrosion Protection	Galvanized	95% Zinc + 5% Alu	PVC Coated
Mesh Size	50.8 x 50.8mm 76.2 x76.2mm	50.8 x 50.8mm 76.2 x76.2mm	50.8 x 50.8mm 76.2 x76.2mm
Unite Size	Wire Diameter	Wire Diameter	Wire Diameter
1 x 1 x 1m	3.0mm,4.0mm,5.0mm	3.0mm,4.0mm,5.0mm	3.0mm/3.8mm
2 x 1x 1m	3.0mm,4.0mm,5.0mm	3.0mm,4.0mm,5.0mm	3.0mm/3.8mm
3x 1 x 1m	3.0mm,4.0mm,5.0mm	3.0mm,4.0mm,5.0mm	3.0mm/3.8mm
4 x 1 x 1m	3.0mm,4.0mm,5.0mm	3.0mm,4.0mm,5.0mm	3.0mm/3.8mm
1 x 1 x 0.5m	3.0mm,4.0mm,5.0mm	3.0mm,4.0mm,5.0mm	3.0mm/3.8mm
2 x 1x 0.5m	3.0mm,4.0mm,5.0mm	3.0mm,4.0mm,5.0mm	3.0mm/3.8mm
3x 1 x 0.5m	3.0mm,4.0mm,5.0mm	3.0mm,4.0mm,5.0mm	3.0mm/3.8mm
4 x 1 x 0.5m	3.0mm,4.0mm,5.0mm	3.0mm,4.0mm,5.0mm	3.0mm/3.8mm

 

 

 

Note:

 

1.) The above tolerance comply with standard EN10223-2:1997; 
2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference;