new automation remote dog training collars , Electric No Bark Shock Control with 7 Adjustable Sensitivity Control with Manual

new automation remote dog training collars , Electric No Bark Shock Control with 7 Adjustable Sensitivity Control with Manual

HOW TO USE:

Note: Please charge before using the product!

1.Charge the remote transmitter:

1) Connect the charger cable to the charging port.

2) Plug the charger into a standard outlet.

3)The icon of battery will flash.

4) Charge the transmitter for about one hour for the first charge or

until the icon of battery stops flashing.

2.Charge the collar receiver:

1) Connect the charger cable to the DC-5V port.

2) Plug the charger into a standard wall outlet.

3) The red light will flash on the receiver

(If not or green light ,please plug the charger again).

4) Charge the receiver for about one hour for the first charge or

until the light indicates charging is completed.

3.Connect transmitter and receiver

1) Turn on the transmitter.

2) Press "1/2" button to choose channel 1 for pairing.

3)Turn on the receiver

4)Press the "Power"button on the receiver again.

5) After a beep from the receiver, press the "Vibartion button"

within 30 seconds for pairing.

6) The collar receiver will beep if connected successfully.

7)If the pairing were not successful, please repeat the 3-5 steps.

8) To encode the second receiver, press the "1/2"button and

select for the second receiver and follow the same procedure.

4.How to change to fully automatic mode:

Press down the“Automatic” Button and the reciever will send out

sound of a tick which indicates that it is changed to the automatic

mode.

5.How to test automatic mode:

Use light bulb accessories to touch Test area lightly, the receiver will

firstly vibrate and shock afterwards.

6.How to adjust the sensitivity under the automatic mode:

After entering into the automatic mode,press down "+"or"-" button

to adjust the sensitivity.

7.How to adjust the level of the vibration and shock

under the automatic mode:

Switching to the manual mode,pressing the "+"or "-" button to adjust

the level of vibration and shock.

Notes 

1. In common, if the battery is full, the receiver can last for 5 days,and the transmitter 10 days.
2. The valid distance of the remote means, the straight-line distance betweenthe Transmitter and the Collar Receiver without obstacles in between. If there are interference signals or other disruptions, the actual remote control distance may be variable.
3. Training sessions should be kept positive and short, suggest 10-15 minutes for each session.
4. Presently, this product is most effective and safest tool for training or barking prevent.Follow the correct operational instructions and you can effectively train the pet without any problems.

patent design csb-10 ultrasonic bark control .

the hottest selling one at amazon 

pet training shock mat 

shenzhen yufeng technology co,ltd

24 hours service hotline : 0086-755-21637095
Website：
www.petenjoy.en.china.cn 

.

1,Are you a factory ,where is it ?established year ,how many workers ?

shenzhen yufeng technology co,ltd speciallizes in design ,research and development and trade of electronic pet products for 10 years, mainly include pet training series ,such as ultrasonic bark control ,pet training shock mat (both we have patent design at china ),dog training collar ,bark stop collar ,pet fencing collar ,and other promotional series related to electronic pet products .

with efficient and professional R&D department ,strict quality control system ,innovative and high quality products ,and considerate service ,yufeng have gained trust and recognition from both domestic and overseas customers .

contact :mellow

skype:sallyyufeng