0-150J/cm2 Gold Member Diode Laser Hair Removal Machine 10.4 Inch Screen

808 diode laser hair removal machine Theory  :

The System use special laser with long PulseWidth 808nm, can penetrate to hair follicle. 

Using Selective light absorption theory, laser can be preferentially absorbed by the melanin of the 

hair And then heating the hair shaft and hair follicle, moreover to destroy the hair follicle and oxygen

 Organization around hair follicle. When laser outputs, system with special cooling technology, cool the 

skin and protect skin from being hurt and reach a very safe and comfortable treatment! 

Specifications

1.Laser hair removal
2.tattoo removal
3.CE certificate
4.OEM/ODM

         gold member diode laser hair removal machine
1.Laser hair removal
2.tattoo removal
3.CE certificate
4.OEM/ODM 

 

  

 

 

Installer procedure:

1.place the machine in a treatment room with temperature is 22—28~C, Humidity is no more than 70%.
2.water injection: pour into distilled water through the injection port,the water rise is 3.8 litres,and in order to guarantee the operation of machine ,you need to observe water level through the injection port,and the standard water level is the distance of water injection port 2cm position.in a word,you need to fill distilled water up and exceed the vent hole.( Don't use mineral water, and water, or tube and machine internal surface would be easy to form scale, and it will affects the luminous efficiency and reduce the service life of tubes)
3.Tighten by cavity mouth thread direction according to corresponding wavelength of spearhead .(1064mn spearhead is used for hyperpigmentation of blue, black and cyan. the 532nm is used for removing the hyperpigmentation of red, coffee ,brown ect.
4. install:Connected to the power cord and pedal switch according the demand uder the circumstance of no leak .
5. Electricity: after make up the machine according to the above requirements, insert the key to open position with right spin, then the power is on .  

 

Technical Specifications:
Laser type:Q-Switched ND YAG laser
Wavelength:1064nm & 532nm
Spot diameter:2-5mm adjustable
Cooling system:wind + closed water circulation cooling
Display:6.0"button screen
Output power:800W
Pulse energy:0-1600MJ
Pulse width:5-10ns
Frequency:1-6HZ
Voltage:100-110V/50-60Hz;230-260V/50-60Hz
Machine size(L*W*H):33*35*53(cm)
Machine net weight:14KG

 

Treatment principle of 808nm diode laser hair remover:

Using thermal damage theory, the abundant melanin absorbs laser energy and the temperature rises rapidly, under this situation the hair follicle and hair shaft are damaged by thermal.

 At the same time, the oxygen supplying tissue surrounding the hair follicle’s stem cells is destroyed by the spreading heat energy.Thus hair regrowth is stopped permanently.

Treatment scope of permanent hair remover:

 All kinds of hair on body! Such as hair on face, around lip area, beard, underarm, legs,breast, bikini area Etc.

Product Features:
1. Improve the efficiency and make the best solutions for no burning on the hand-piece at all.
2. Long lifetime for Xenon Lamp which is with the imported US technology.
3. More stability with the hand-piece structure inside improved.
4. Add the infrared Guide light to aim the target tissue correctly.
5. Portable design and easy operation can do the touring treatment; lower cost and wider usage can make quick return of investment.

Working Principle :
Laser emitted by the system has a strong penetration ability which allows it to reach the deep layer of dermis. The pigment particles absorb the light energy and explode sharply, burst into the tiny pieces, thus diminish the color density and get rid of it.
So the appliance can effectively do away with mutant pigmentations and vascular tissue based on undamaged ambient tissue. This is called Selective heat absorption‘ principle in medical field.

 

 

similar product 

 

 

Treatment characteristics

1.Terminator 808 + combines the benefits of all 3 wavelengths, It is groundbreaking for the laser hair removal industry.

2. combined wavelengths covering the optimal treatment spectrum 808nm 755nm 1064nm,  the treatment Characteristics for different hair

3.Virtually painless

4.All skin types, even tanned skin

 

 

 

 

 

 

 

 

 

 

Effective:

steady energy is achived by
a. Japan made Capacitors which stabilizes.

b. US made laser rod ensures 100,000,000shots.(every shot, steady energy)  but during our testing it went to 10 million shots.

c. 2 filters(one to filter out all impurities out of water to keep flow in high speed, and other preventing ion influx and decreasing the chances of laser bar damage.)

d. Japan made radiator tube , so water is always clean and flows fluently giving pleasant feelings while treatment.  

e. High speed DC pump made in germany, which keeps TEC chilled water flowing. 

f. 2 different power supplies , one for TEC cooling system and other for pump screen and other systems.