salon equipment laser hair removal equipment tm-j116

Specifications

salon equipment laser hair removal equipment tm-j116
1.factory supply
2.Nd yag laser
3.CE certificate

  salon equipment laser hair removal equipment

 tm-j116

1.factory supply
2.Nd yag laser

3. CE certificate

   

 

Installer procedure:

1.place the machine in a treatment room with temperature is 22—28~C, Humidity is no more than 70%.
2.water injection: pour into distilled water through the injection port,the water rise is 3.8 litres,and in order to guarantee the operation of machine ,you need to observe water level through the injection port,and the standard water level is the distance of water injection port 2cm position.in a word,you need to fill distilled water up and exceed the vent hole.( Don't use mineral water, and water, or tube and machine internal surface would be easy to form scale, and it will affects the luminous efficiency and reduce the service life of tubes)
3.Tighten by cavity mouth thread direction according to corresponding wavelength of spearhead .(1064mn spearhead is used for hyperpigmentation of blue, black and cyan. the 532nm is used for removing the hyperpigmentation of red, coffee ,brown ect.
4. install:Connected to the power cord and pedal switch according the demand uder the circumstance of no leak .
5. Electricity: after make up the machine according to the above requirements, insert the key to open position with right spin, then the power is on .  

 

Technical Specifications:
Laser type:Q-Switched ND YAG laser
Wavelength:1064nm & 532nm
Spot diameter:2-5mm adjustable
Cooling system:wind + closed water circulation cooling
Display:6.0"button screen
Output power:800W
Pulse energy:0-1600MJ
Pulse width:5-10ns
Frequency:1-6HZ
Voltage:100-110V/50-60Hz;230-260V/50-60Hz
Machine size(L*W*H):33*35*53(cm)
Machine net weight:14KG

 

Product Features:
1. Improve the efficiency and make the best solutions for no burning on the hand-piece at all.
2. Long lifetime for Xenon Lamp which is with the imported US technology.
3. More stability with the hand-piece structure inside improved.
4. Add the infrared Guide light to aim the target tissue correctly.
5. Portable design and easy operation can do the touring treatment; lower cost and wider usage can make quick return of investment.

Working Principle :
Laser emitted by the system has a strong penetration ability which allows it to reach the deep layer of dermis. The pigment particles absorb the light energy and explode sharply, burst into the tiny pieces, thus diminish the color density and get rid of it.
So the appliance can effectively do away with mutant pigmentations and vascular tissue based on undamaged ambient tissue. This is called Selective heat absorption‘ principle in medical field.