Contact Platform Support
Help CenterVERTICAL SUMP PUMP
Related Products
Vertical Centrifugal process pump can be used in any installation or specially where the saving of space is important factor and most important where liquid is difficult to lift because of nature like temp , corrosiveness etc
These pump are designed for use where the liquid handled to be is of highly corrosive Nature or where non – adherence of product or zero metallic contamination is must These pumps are equally ideal for continuous or intermittent service for handling Corrosive as well as ultra pure chemicals without fear of corrosion or contamination
High Temperature services :Maximum working temperature is 110 C / 200 C.
Length :Pumps lengths available from 1’ to 12’ with flow rate up to 50m3/h or 120 meter head. Higher capacities and head available on request and even multistage pump can be also made .
Models :Available in conventional or tailor-made configuration. Several models such as suction extension with float switch, duplex pumping station with float switch (auto on/off device) also available.
SPECIAL FEATURES:-:
- Bearing free design for handling abrasives in solutions.
- Motors are flange mounted single or three phase TEFC from 1 HP to 100 HP .
- Epoxy / Polyurethane paints are used on metallic bearing housing.
- Radial vanes on backside of impeller increase flow or fluids through the sleeve bearing preventing overflow at top of column.
- Lubrication of bearings by product itself or by fresh water.
- All models operate at 1450 rpm / 2900 rpm (Variable speed motor available )
- Specially designed vapor seal provided to protect bearing from corrosive fumes
- Dynamically balanced impeller
Send Inquiry to This Supplier
You May Also Like
-
Spot Danfoss Piston Pump JR-L-S75C-LS-21-25-NN-N3-S1NE-A2NNNN-JJ J-NNNNegotiableMOQ: 1 Piece -
M, AH, HH Series Slurry PumpNegotiableMOQ: 1 Piece
-
Heavy Duty Corrosion Proof Pump Anti Corrision Pump for Chemical Plant EngineeringNegotiableMOQ: 1 Piece
-
Heavy-Duty Submersible Pump 220V 370W, Cast Iron Body, 12m Max HeadNegotiableMOQ: 1 Combo
-
Water PumpNegotiableMOQ: 2300 Pieces
-
Self-Priming Chemical Axial Flow Magnetic Oil Pump for Industrial UseNegotiableMOQ: 10 Bags
-
Japan Komatsu PC200-8 PC210-8 PC220-8 Excavator 708-2L-31430 Hydraulic Main Pump 7082L31430US$ 4000 - 5000MOQ: 1 Unit
-
Innovative CMO GHIBLI FOOT PUMP Industrial Solutions for Enhanced PerformanceNegotiableMOQ: 1 Set
-
Manufacturer Direct Selling Fluorine Lined Strong Acid and Alkali Resistant Pump IHF Series Fluorine Plastic Alloy Chemical Centrifugal PumpUS$ 150 - 1600MOQ: 10 Pieces
-
Non Sparking Hand Oil Pump Cu-Al Transfer Portable, SCREW TypeUS$ 144 - 274MOQ: 1 Piece
