Si Ba Ca alloy/Inoculant manufacturer
- 3000 Metric Ton / Metric Tons per Month
- Tianjin/Qingdao
- T/T
Product Details
Place of Origin: | Henan, China | Brand Name: | Huatuo | Model Number: | as customers' requirments |
Application: | steelmaking&casting&foundry | Shape: | powder; granules; grain; lumps;block | Material: | Si Ba Ca alloy |
Dimensions: | 0.3-1mm; 1-3mm; 3-8mm | Chemical Composition: | Si, Ca,Ba, Al, Mn, C, P, S |
Product Description
Si Ba Ca alloy/Inoculant manufacturer
Inoculants are added in liquid cast iron in order to provide the best and consistent characteristics in the final casting. They are used to control matrix structure and avoid casting defects.
Inoculants can be found under several grain size distributions to satisfy the location of the inoculant addition within the foundry process. those locations of inoculant addition are known as in furnace, in ladle, in stream or in mould.
The addition of inoculants in liquid cast iron (gray and ductile irons) allowed to:
1)improve the homogeneity of the cast iron structure
2)eliminate the formation of carbides into thin parts or salient angles
3)direct the solidification towards the stable diagram, with graphite precipitation
4)refine the structure (higher cells count, finer grains in the microstructure)
5)improve mechanical properties
6)better separate slag and metal
7)decrease the tendency to dross formation
8)decrease tendency of micro-shrinkage
9)decrease risk of gas formation
10)decrease risk of mold / metal interface defects
Application
1)Homogeneous precipitation of graphite in gray iron casting, while avoiding undercooled graphite
2)Aiming for high number of graphite nodules in ductile iron casting
3)Avoidance of chilling, carbide formation and hard edges
4)Freedom from porosity
5)Improvement of mechanical and technical properties
Specification
Type | Chemical Composition | |||||
Model No. | Size | Si | Ba | Ca | Re | Fe |
Ba3~65 | 0.5~2 | 60~65 | 2~4 | 0.5~2.5 | / | balance |
Ba5~60 | 2~5 | 55~60 | 4~6 | 0.5~2.5 | / | balance |
BaRe5~60.5 | 3~8 | 55~60 | 4~6 | 0.5~2.5 | 4~6 | balance |
Ba10~55 | 0.2~3 2~8 | 50~55 | 8~12 | 3.5~5.5 | / | balance |
Ba15~50 | 0.2~3 2~8 | 40~50 | 13~17 | 3.5~5.5 | / | balance |
Ba20~45 | 0.2~3 2~8 | 40~45 | 18`20 | 3.5~5.5 | / | balance |
Ba3~50 | 0.2~3 2~8 | 46~54 | 1.5~4 | 1~3 | 3~5 | balance |
Si72 | 0.3~2 | 70~72 | / | 1~3 | / | balance |
Company Profile
Anyang Huatuo Metallurgy Co., Ltd. is located in Anyang City, Henan Province of China. Anyang is rich in mineral resources. Our company has very convenient transportation, being near to Tianjin Port.
Our factory was founded in 2001,and with a total area of about 40,000 square meters, we have strong technical strength and advanced production equipment, and specialize in producing ferroalloy products. Our main productions are: steel-making deoxidizer, refractory raw materials, casting materials, water atomized products, welding powders and other related products. Especially, our best-selling products are alloy powder and silicon-iron alloy
Our goods are welcomed to the majority of provinces and cities throughout the country and exported to many countries, including the U.S.A., India, South Africa, Mexico, Korea, and Japan.Good quality, good service and all the other advantages help us win the welcome from our foreign customers. Adhering to the business principle of "Quality First and Credit Supreme", we always focus on "development, innovation, management and service" and insist on technical reform at high level to develop new products. Therefore, we have garnered a great reputation among customers both at home and abroad.
Certificates
Contact Us
- Anyang Huatuo Metallurgy Co., Ltd.
- Contact namezhongshan Wang
- Phone86-372-5039979
- AddressQu Town of Anyang County Industrial Park East Zhangwu Anyang,Henan
Calcium Silicon | Cored Wire | Ferro Silicon | Inoculant |
New Products | Nodulizer | Silica Fume | Silicon Briquette |
Silicon Carbide | Silicon Manganese | Silicon Metal |
- Lined with ceramic wear-resistant elbow
- Magnesium alloy sacrificial anodes for casing
- High potential magnesium anode Cathodic protection material
- Magnesium alloy sacrificial anode for pipe network
- Magnesium alloy sacrificial anode
- Magnesium alloy sacrificial anode for reservoir gate
- Magnesium alloy sacrificial anode for gas transmission line
- Magnesium alloy sacrificial anode on tank wall
- Magnesium alloy sacrificial anode for buried pipeline
- Magnesium alloy sacrificial anode Cathodic protection material
- Magnesium alloy sacrificial anode set
- Ground gate magnesium alloy sacrificial anode Direct factory delivery
- Magnesium alloy sacrificial anode for pipe network Good stock
- Magnesium alloy sacrificial anode for storage tank Cathodic protection material
- Magnesium alloy sacrificial anodes for pipes Good stock
- Magnesium strip sacrificial anode Anti-corrosion material
- Magnesium alloy sacrificial anode for buried pipeline Direct factory delivery
- Magnesium alloy sacrificial anode for reservoir valve Good stock
- Magnesium alloy sacrificial anode for drainage line Direct factory delivery
- Magnesium alloy sacrificial anode for gas transmission line Anti-corrosion material
- Magnesium alloy sacrificial anode Cathodic protection material
- Manganese Ingot Mn98 Mn97 Mn95 Metal Mn Ingot for Steel Making
- 500nm Spherical Copper Powder Cu-GB0501
- Manufacturer provides soldering wire and lead-free soldering wire
Popular Searches
Recommended Products
- graphitized carburant,carbon additive,recarburizer,carburant,GPC,graphite powder
- Pure Ca wire 9mm 10mm Calcium metal Wire for steelmaking
- Silicon Manganese 6517 / Si17Mn65 ferro alloy
- calcium silicon lump / CaSi lump factory Si 60% Ca 30%
- Calcium silicon filling wire CaSi cored wire 13mm Ca30% Si55%
- Low Alloy High Strength Steel Plate EN S355m S355ml S355n S355nl
- A203 Low Temperature Pressure Vessel Steel Plate
- ASME SA515 SA516 SA537 High Temperature Pressure Vessel Steel Plate
- Mining machinery cold drawn seamless square and rectangular steel tube with high performance and low price
- calcined petroleum coke/CPC/GPC for carbon cored wire making
- ferro calcium silicon alloy,CaSiFe powder 0-2mm 0-3mm
- TiFe cored wire 13mm Titanium Ferro alloy wire for steelmaking
Find Similar Products By Category
- Minerals & Metallurgy > Other Metals & Metal Products
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
zhongshan Wang
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-