Ferrosilicon Alloy Used as Inoculator Inoculant in Metallurgy
- 3000 Ton / Tons per Month
- Tianjin;Qingdao or other basic port in North China.
- T/T
Product Details
Place of Origin: | Henan, China | Brand Name: | Huatuo | Model Number: | FeSi45-75 |
Application: | Steel Making;Casting; | Shape: | Powder;Granule;Flake;Lump;Slag; | Material: | Fe;Si; |
Dimensions: | 0-100mm | Chemical Composition: | Fe;Si;Mn;Cr;C;P;S |
Product Description
Specifications
Ferrosilicon Alloy Used as Inoculator Inoculant in Metallurgy from Original Manufacturer China.
Ferrosilicon Alloy Used as Inoculator Inoculant in Metallurgy
Application:
Inoculants are added in liquid cast iron in order to provide the best and consistent characteristics in the final casting. They are used to control matrix structure and avoid casting defects.
Inoculants can be found under several grain size distributions to satisfy the location of the inoculant addition within the foundry process. those locations of inoculant addition are known as in furnace, in ladle, in stream or in mould.
Ferro silicon is a ferroalloy, an alloy of iron and silicon with an average silicon content between 15 and 90 weight percent. It contains a high proportion of iron silicides and can be used as inoculant with characters below:
1)improve the homogeneity of the cast iron structure
2)eliminate the formation of carbides into thin parts or salient angles
3)direct the solidification towards the stable diagram, with graphite precipitation
4)refine the structure (higher cells count, finer grains in the microstructure
5)improve mechanical properties
6)better separate slag and metal
7)decrease the tendency to dross formation
8)decrease tendency of micro-shrinkage
9)decrease risk of gas formation
10)decrease risk of mold / metal interface defects
Product Details:
Except our above regular products,we can also produce other models in different grades/sizes/shapes according to your specific requirement.
Quality & Certification:
Our factory was founded in 2001,and covers a total area of about 40,000 square meters, with strong technical strength and advanced production equipment, we had specialize in producing ferroalloy products for more than ten years.
Our main products includes steel-making deoxidizer, refractory raw materials, casting materials, water atomized products, welding powders and other related products. All our goods were well-accepted by the majority of our domestic clients throughout the country and had been exported to many countries and areas such as the U.S, India, South Africa, Mexico, Korea, and Japan.Excellent quality, good service and all the other advantages helped us got a lot of reputations from our foreign customers.
As a leading manufacturer in this field,we have gained the ISO 9001 certificate in 2008,and built a strict quality control system.
Samples & Inspection:
We could provide free sample for our customers, the buyer will only have to bear the express charge.
And we do arrange factory inspection for all goods which had been produced and deliverd,and can provide SGS and certification from other testing organizations as well.Additionally, the buyer may appoint a third party inspector or, in person for inspection of the goods.
Ordering & Payment:
You could place a trial order for test the quality of the goods,our minimum order quantity if 20 tons.If the tria order met your satisfaction, you can place a official order.
We usually accept T/T and L/C payment and will deliver the goods within 14 working days after receipt of the advance payment/ Letter of credit.
Packing & Delivery:
1.Regular products packing with a multilayer woven palstic ton bag each ton. Or with small bags(20/25/50kg) then into a ton bag.
2.Special product package with moistureproof bags.
3.Package with customers' requirement.
With a adequate capacity and convenient location(which is about 5 hours' way form Tianjin port),we would garantee a timely delivery to our customers.Usually with 14 days up receiving of an order.
Others:
For more details/questions,please feel free to contact with us by leave message at this page or sent us a inquiry.We will gave a prompt reply according to your requirement/question.
Contact Us
- Anyang Huatuo Metallurgy Co., Ltd.
- Contact namezhongshan Wang
- Phone86-372-5039979
- AddressQu Town of Anyang County Industrial Park East Zhangwu Anyang,Henan
Calcium Silicon | Cored Wire | Ferro Silicon | Inoculant |
New Products | Nodulizer | Silica Fume | Silicon Briquette |
Silicon Carbide | Silicon Manganese | Silicon Metal |
- Lined with ceramic wear-resistant elbow
- Magnesium alloy sacrificial anodes for casing
- High potential magnesium anode Cathodic protection material
- Magnesium alloy sacrificial anode for pipe network
- Magnesium alloy sacrificial anode
- Magnesium alloy sacrificial anode for reservoir gate
- Magnesium alloy sacrificial anode for gas transmission line
- Magnesium alloy sacrificial anode on tank wall
- Magnesium alloy sacrificial anode for buried pipeline
- Magnesium alloy sacrificial anode Cathodic protection material
- Magnesium alloy sacrificial anode set
- Ground gate magnesium alloy sacrificial anode Direct factory delivery
- Magnesium alloy sacrificial anode for pipe network Good stock
- Magnesium alloy sacrificial anode for storage tank Cathodic protection material
- Magnesium alloy sacrificial anodes for pipes Good stock
- Magnesium strip sacrificial anode Anti-corrosion material
- Magnesium alloy sacrificial anode for buried pipeline Direct factory delivery
- Magnesium alloy sacrificial anode for reservoir valve Good stock
- Magnesium alloy sacrificial anode for drainage line Direct factory delivery
- Magnesium alloy sacrificial anode for gas transmission line Anti-corrosion material
- Magnesium alloy sacrificial anode Cathodic protection material
- Manganese Ingot Mn98 Mn97 Mn95 Metal Mn Ingot for Steel Making
- 500nm Spherical Copper Powder Cu-GB0501
- Manufacturer provides soldering wire and lead-free soldering wire
Popular Searches
Recommended Products
- Ferror Silicon Calcium core wire 13mm/ CaSiFe wire Si50-60% Ca20-30/CaSi cored wire
- Pure Calcium metal Wire 9mm 10mm / Ca cored wire 56-70g/m
- Ferro Silicon Manganese lump 6517/ FeSiMn lump 10-60mm
- SUJ2 GCR15 bearing steel round bars
- AISI H13 8407 4Cr5MoSiV1 D2 Cr8 Cr12MOV SKD11 DC53 H11 P20 Nak80 1.2379 1.2344 1.2311 1.2312 15cdv6 M390 Cold Hot Work Plastic Plate Bar Die Tool Mould Steel
- Mould Plate SKD61 AISI H13 1.2344 8407 Steel Platemould Base Milled Steel
- Tool/Die/Mould Steel Grade P20 1.2311 1.2738 1.2312 1.2344 Flat Plate Round Bar Block Alloy Mould Special Steel
- Magnesium oxide 90%
- graphitized carburant,carbon additive,recarburizer,carburant,GPC,Artificial graphite powder
- Edible oil decolorizing agent
- ATSM A53/A106 carbon seamless square and rectangular steel tube with low price
- A514 A517 A516 Q245R Q345R Container Carbon Steel Plate
Find Similar Products By Category
- Minerals & Metallurgy > Other Metals & Metal Products
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
zhongshan Wang
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-