widely used first-rate flotation equipment BS-K flotation machine from China

widely used first-rate flotation equipment BS-K flotation machine from China

I. Product features

The main shaft of BS-K flotation machine is hung at one side of the frame. The bearing body which is with a light structure is convenient to be installed with a good perpendicularity. With cone-shaped cross section of the impeller and radiation-shaped stator, the machine is featured with wear resistance, long service life and powerful agitating force. U-shaped tank reduces the ore accumulated at the bottom of the tank. With light main shaft parts, the stator is installed at the bottom of the tank, it’s easy to install them. With small installed power, the machine is energy saving. With compressed air filled in, air bubbles disperse uniformly and the foam is stable. Thus, the suspension of mineral grains is good with a high recovery rate.

This product is divided into several units, such as single tank, double tank, three tanks, four tanks, five tanks and six tanks, etc. Since this product has no ability of imbibing the ore pulp and air spontaneously, the flow of ore pulp needs terrace arrangement, and the return of foams depends on the foam pump.

II. Note for selection

While placing your order, in addition to specifying the model and quantity, make sure to provide the flotation circuit and the following Configuration scheme and feeding mode; quantity of the scrapers and mode of drive(right drive or left drive); quantities of feeding chambers, intermediate chambers, and crude ore chambers ;other special requirements

No electric control cabinet will be supplied.

The flashboard will be made according to the manufacturer's drawings. And the electric driven flashboard will be adopted for large-scale floatation machine.

III. Technical Parameter List

We can provide various types of flotation machine, such as XJK, SF, BF, JJF,BS-K, XCF-KYF etc. Welcome to send us e-mails to get more information about our company and products. We spare no efforts in endeavoring to be of service to you.

Packaging Details:nude package for main machines and standard package for spare parts or customized

Delivery Detail: 7 to 28 working days after receipt of the advance payment

Before sales:

Guide customer to choose the most suitable type of equipments. Provide advanced, energy-saving and practical flow chart as well as responsible for designing the site.

On sales:

Inspect the product seriously before out of the factory. Invite customer for commissioning in the spot and raising the objection. Organize to delivery according to the contract.

After sales:

Company can send technical persons for guiding to install, debug and train the workers.

We will provide one-year warranty to make sure your machine work well. We have spare parts of the very machine in stock all the time which means the replacements can be sent to you timely.

     Shandong(Zhaoxin) Mining Machinery Group Company as Shandong(Zhaoxin) Heavy Machinery Co., Ltd with 30 years manufacturing experience and scientific management and strong financial strength, the company has become a large and leading manufacturer in mineral processing and smelting equipment for nonferrous metals in Shandong area.   

Welcome to visit our factory!!!

Q: About payment

A: Usually 30%T/T prepaid and 70%TT to be paid upon received copy of bill of lading. 

Q: How to get an accurate quotation?
A: Please kindly advise the following information to facilitate us to quote accordingly:

a. stone type;  b. the capacity(tons/hour); c. input size; d. output size, or more of your requirement. 

Q: About instalation

A: As per customer's requests, Zhaoxin would arrange installation technicians to supervise and assist in the assembly and commissioning of the equipment.
Q: About warranty
A: The warranty is one year exclude the wearable parts of the machine. 
Q: What if customer not familiar with mining?
A: Do not worry, Zhaoxin offers full service from mining, prospecting, mineral processing experiment, project technical design, machinery and equipment installing to technical conduction and operators training.

Q: Can I visit your factory?

A: Yes. Many domestic and international customers visit our factory every year.

Q: How long is the warranty of your equipment? Do you supply spare parts?

A: Our warranty period is one year generally. We can supply spare parts.

Q: Do you provide after-sale service?

A: Yes. We have a professional after-sale service team to promptly and thoroughly solve your

 problems.

 If you have any questions about our products or services, pls don’t hesitate to let us know.