WALL PAINT COLOR CHART PAINT COLORS FOR INTERIOR WALLS LATEX PAINT

GLOSS EMULSION PAINTS

TYPE

The gloss emulsion paint based on excellent water resistant, alkali resistant water-based resin with weather resistant pigment and additives.

USES

Used for indoor cement walls to decoration and protection such as office , living room and other need brighter area.

CHARACTERISTICS

1. Use water as the solvent without pollution and fire danger.

2. Use water as a dilution to be able to reduce the construction cost.

3. High gloss, hard film with smooth appearance.

4. Excellent resistance to water and alkalis.

APPLICATION METHOD

Spray, Brush, Roller.

COLOR

White or light colors

GLOSS

High gloss

SPECIFIC GRAVITY

Above 1.2 Kg/L

VISCOSITY (25℃)

85 ~ 105 KU  

DRYING TIME (25℃)

Set-to-touch

Dry hard

1/2 hr.

3 hrs.

OVERCOATING INTERVALS

(25℃)

Min.

3 hrs. 

OPTIMUM FILM THICKNESS

Wet

Dry

90 microns

35 microns

VOLUME SOLIDS

Above 50%

THEORETICAL COVERAGE

40 m2/Gal 10 m2/L 9 m2/Kg

THINNER

Tap water

THINNING RATE

5 ~10 %(by wt.)

STORAGE SHELF LIFE

Minimum 2 year under normal storage conditions.

POT LIFE

-

NOTE

1. Before application, stir paint thoroughly, and when paint is too thick, the

    tapwater within specified quantity can be added.

2. Adhered moisture, grease, and dirt on substrate must be cleaned thoroughly.

3. The application must be waited for 2 to 3 weeks until the walls were

    completely  dry off, because the new constructed cement walls contain a lot

    of moisture and free alkaline substances that may reduce paint film

    performance and adhesion.