Contact Platform Support
Help CenterPAINT COMPANIES PRODUCE METALLIC WHITE SPRAY FOOD GRADE EPOXY PAINT
Related Products
-
(N-TYPE)TEXTURED SPRAY PAINT ACRYLIC SHINY GOLD SPRAY PAINTUS$ 21.6 - 26.2MOQ: 1944 Sets -
WATER BASED LIFE PAINT ASAIN PAINTS WALL PAINT DISTRIBUTORSUS$ 57.2 - 64.94MOQ: 1 Set
-
AEROSOL PAINT SPRAY LACQUER PAINT FOR WALLS GRAFFITI SPRAY PAINTUS$ 50 - 62.5MOQ: 120 Barrels
-
(N-TYPE)MADE IN TAIWAN GALLON ACRYLIC PAINT RAL 7035 2K PAINTUS$ 24.12 - 36.67MOQ: 2 Sets
-
WATER BASED PAINT DISTRIBUTORS OF ACRYLIC EMULSION PAINTUS$ 57.2 - 64.94MOQ: 120 Barrels
PAINT COMPANIES PRODUCE METALLIC WHITE SPRAY FOOD GRADE EPOXY PAINT
TOP COAT EPOXY RESIN PAINT | ||
TYPE |
A two-pack, multipurpose epoxy finish coating based on Epoxy Resin. |
|
USES |
Topcoat for cement products, bridge, steel pipes, steel structure of factories. |
|
CHARACTERISTICS |
1. Tough, hard film and high abrasion resistance. 2. Excellent resistance to sea water. 3. Excellent resistance to mechanical damage. 4. Very good resistance to oil and mild chemicals |
|
APPLICATION METHOD |
Spray, Brush, Roller. |
|
COLOR |
Desired colors |
|
FINISH |
Gloss |
|
SPECIFIC GRAVITY |
Above 1.1 kg/L, depending on colors (Mixture) |
|
VISCOSITY (25℃) |
70 ~85 KU (Mixture) |
|
DRYING TIME (25℃) |
Set-to-touch Dry hard Fully cured |
3 hrs. 24 hrs. 7 days. |
OVERCOATINGINTERVALS (25℃) |
Min. Max. |
8 hrs. 5 days. (25℃) or 3 days. (30℃) |
OPTIMUM FILM THICKNESS |
Wet Dry |
100 microns 40 microns |
VOLUME SOLIDS |
Above 60%(Mixture) |
|
THEORETICAL COVERAGE |
10m2/L 9 m2/KG 38m2/GL |
|
THINNER |
Epoxy Thinner |
|
THINNING RATE |
5 ~10 %(by wt.) |
|
PRECEDING COATS |
Epoxy Primer |
|
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
|
MIXING RATIO |
Base : Hardener = 5 : 1 (by wt.) |
|
POT LIFE |
8 hrs. (Mixture) (25℃) |
|
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Remove any soap, dust, rust, grease, old paint surface or any salt-containing chemicals before coating. 3. Avoid applying the paint in rainy weather or humidity above 85% RH, particularly, a wet surface must be thoroughly dried 4. All equipment must be cleaned immediately after use. 5. When used inside tanks, sufficient ventilation must be provided. 6. When overcoating interval is exceeded, paint surface must be roughened to insure adhesion. 7. Coating surface would be chalking by sunshine. |
|
Send Inquiry to This Supplier
You May Also Like
-
Anti-static Self-leveling Epoxy Floor CoatingNegotiableMOQ: 1
-
Epoxy Resin Paint Industrial Paints for Spray Application on IronUS$ 1 - 9MOQ: 1 Kilogram
-
PVC Coating Powder for Security Wire Mesh Fence - Enhanced DurabilityUS$ 2 - 5MOQ: 1000 Kilograms
-
Titanium Dioxide Rutile Type 93% Used for Paint STD001 Shijiazhuang Standard ChemicalsUS$ 100 - 2000MOQ: 1 Ton
-
Aliphatic Polyurethane Paint for BuildingUS$ 1.8 - 8MOQ: 1000 Kilograms
-
Rotary Water Spray RoomNegotiableMOQ: 1 Set
-
EASY PAINTNegotiableMOQ: 2000 Pieces
-
Rubber Paint on SaleUS$ 1.45 - 35.21MOQ: 100 Pieces
-
Powder Coating EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
Glass Car Body Coating From JapanUS$ 150,000 - 150,000MOQ: 1 Carton
