ALL CATEGORIES

Home > Chemicals > Paint & Coating > Building Coating > MADE IN TAIWAN CEMENT FLOOR EPOXY RESIN COATING PRIMER

MADE IN TAIWAN CEMENT FLOOR EPOXY RESIN COATING PRIMER

Name: MADE IN TAIWAN CEMENT FLOOR EPOXY RESIN COATING PRIMER
Brand: BUO GUH
SKU: 131783871
Availability: InStock

US$ 54.3 - 57 MOQ: 120 Sets

Key Specifications

Place of Origin:

Taiwan, China

Main Raw Material:

Epoxy

Usage:

Building Coating

Buo Guh Paints Co., Ltd.

Payment & Shipping

Payment Methods:

Port of Shipment:

TAIWAN

Delivery Detail:

Delivery time depends on order quantity.

Place of Origin Taiwan, China

Main Raw Material Epoxy

Usage Building Coating

Application Method Brush

State Liquid Coating

Brand Name BUO GUH

Model Number EPLP-01G

MADE IN TAIWAN CEMENT FLOOR EPOXY RESIN COATING PRIMER

Detailed Images

EPOXY CLEAR CEMENT PRIMER
TYPE	A two-pack, Clear primer based on epoxy resin and special hardener.
USES	Clear primer for concrete wall, pipes and concrete products.
C HARACTERISTICS	1 Very good adhesion for cement. 2. Excellent resistance to abrasion.
GLOSS	-
COLOR	Clear liquid
SPECIFIC GRAVITY	Above 0.85 kg/L (Mixture)
VISCOSITY (25℃)	50~65 KU (Mixture)
DRYING TIME (25℃)	Set-to-touch 2 hrs. Dry hard 10 hrs. Fully cure 7 days.
OPTIMUM FILM THICKNESS	Wet 100 microns Dry 25 microns
MIXING RATIO	Base : Hardener = 8 : 1 (by weight)
NON-VOLATILES CONTENT	Above 60% (Mixture)
THINNER	Epoxy thinner
THINNER RATE	0~5% (uninvolve to clean tools)
STORAGE SHELF LIFE	Minimum 1 year under normal storage conditions.
APPLICATION METHOD	Spray, Brush, Roller.
NOTE	1. Mix base, hardener and zinc dust according to mixing ratio and stir thoroughly. 2. Adhered moisture, grease, dirt, rust and corrosive salts on substrate must be cleaned thoroughly. 3. Avoid applying the paint in rainy weather or humidity above 85% RH,particularly, a wet surface must be thoroughly dried. 4. All equipment must be cleaned immediately after use. 5. When used inside tanks, sufficient ventilation must be provided. 6. When over coating interval is exceeded, paint surface must be roughened to insure adhesion.