220V 0.75kW 2.4N.m 3000RPM AC servo motor/servo drive encoder

EM Series Servo System Introduction

Servo Drive Feature:

1. Power Voltage: single phase AC 220V±15% / 3 phase AC 220V±15%.

2. Control Model: Position, speed, torque, speed trial run, and JOG trial run.

3. Built-in regenerative brake.

4. Optional incremental encoder, wire-saving encoder, absolute encoder and resolver.

5. Speed frequency response over 400Hz.

6. Speed fluctuation is less than 0.03% of rated speed.

7. Speed control ratio 1:5000.

8. Input pulse frequency: 0~500 KHz.

9. Applicable for servo motor with less than 5 times moment of inertia.

10. Strong protection function, abundant control models and higher performance.

Servo Motor Feature:

1. The max torque is up to 300% of rated torque.

2. The max current is up to 300% of rated current.

3. The max speed is up to 4500rpm.

4. Be used to drive the feed shaft of various machineries.

5. Various models (200W~22KW, with brake etc).

6. Standard mounted wire-saving encoder 2500rpm, optional absolute encoder 131072rpm or resolver.

7. Standard protection configuration is IP65.

8. The malfunction ratio is less than 0.01%within 18 months warranty.

Servo motor and servo drive model selection:

Remark:

    1.   Free match 3.5 meters power cable and encoder cable.

    2.   Adding braking should specially mention.