Input Output AC Choke Reactor

Specifications

1.AC input choke for frequency inverter
2.operating frequency:50/60HZ
3.for harmonic filtration

EM-RAI3 Three Phase input AC choke Specification
Function:
1. Reduction of harmonic wave, Improvement of the power factor.
2. Over-voltage restriction and clean the power grid.
3. Reducing the stress caused by noise to motor extended the life span of motor.
4. Improvement of low-frequency conduction emission/sensitivity.

Inverter input ac line reactor, ac choke, reactor 2% 
1.  System voltage: 3phase AC380v-440V
2.  Rated current:1.8A-1250A
3.  Using frequency: 0-60Hz.
4.  Input reactor: 0.75kw-600kw
5. Altitude: <100 0 meters
6. Environment temperature: -25 degrees Celsius~ 40 degrees Celsius
7.  All copper and silicon steel sheet 
8.  Small size, light weight, small footprint, easy to install. 
9.  Increase Drive System Reliability 
10.Reduce Harmonics; Reduce Surge Currents; Reduce Voltage Doubling Effects.
11. Improve True Power Factor.
12. All-copper wire and silicon steel sheet 
13. Elegant design 
14. Noise level: <40db 
15. Standard:IEC289:1987
16. Protection class: IP00
17. Insulation class: H
18. Standard: IEC289: 1987 Reactor
19. GB10229-88 Reactor (equivalent to IEC289:1987)
20. JB9644-1999 Reactor for semi-conductor transmission
21. Insulation Resistance: 1000VDC, insulation resistance≥100MΩ.
22. Reactors are used vacuum dipping process, the high temperature bake curing. Coil has good insulation properties, the overall mechanical strength, moisture resistance; 
23. Coil is F, H class insulation system, greatly improving the reliability of long-term operation;
24. Low temperature, low loss, low cost, utilization rate; 
25. The input reactor to limit the form of harmonic wave feedback circuit. They can also be reduced because of the converted DC Link Capacitor input rectifier caused by AC current and frequency; baseline reactor pressure drop UD = 2%, with a feeder unit for the drive and automatic operation of the transformer, but also for uk< 1% of the system operation. 

 

Model No.	Voltage	Power	Current	G.W	Packing size	Installation dimension
	(V)	(KW)	(A)	(KG)	L*W*H(mm)	H*W*D(mm)
EM-RAI3-d75	400	0.75	1.8A	2	120*76*110	70*47* 7
EM-RAI3-1d5	400	1.5	2.5A	2.2	120*76*110	70*47* 7
EM-RAI3-2d2	400	2.2	5A	3	120*92*120	70*47* 7
EM-RAI3-004	400	4	10A	4	130*80*138	75*60* 7
EM-RAI3-5d5	400	5.5	15A	4.5	130*80*138	75*68* 7
EM-RAI3-7d5	400	7.5	20A	5	160*100*160	90*65* 7
EM-RAI3-011	400	11	30A	6	160*120*165	90*78* 7
EM-RAI3-015	400	15	30A	6	160*120*165	90*78* 7
EM-RAI3-018	400	18	50A	9	205*125*160	110*70* 7
EM-RAI3-022	400	22	50A	9	205*125*160	110*70* 7
EM-RAI3-030	400	30	60A	10	205*130*146	110*83* 7
EM-RAI3-037	400	37	75A	11	205*135*163	110*88* 7
EM-RAI3-045	400	45	90A	12	205*140*164	110*88* 7
EM-RAI3-055	400	55	120A	16	225*165*192	120*100* 10
EM-RAI3-075	400	75	150A	19	225*176*203	120*110* 10
EM-RAI3-090	400	90	190A	23	280*196*214	150*110* 10
EM-RAI3-110	400	110	210A	26	280*205*216	150*110* 10
EM-RAI3-125	400	125	250A	28	280*216*212	150*121* 10
EM-RAI3-132	400	132	290A	30	280*217*235	150*121* 10
EM-RAI3-160	400	160	330A	32	280*205*234	150*121* 10
EM-RAI3-185	400	185	400A	38	320*210*270	160*130* 10
EM-RAI3-220	400	220	440A	45	320*210*270	160*130* 10
EM-RAI3-250	400	250	490A	50	320*230*270	160*140* 10
EM-RAI3-280	400	280	540A	53	320*230*290	160*140* 10
EM-RAI3-315	400	315	600A	63	390*240*335	200*130* 10
EM-RAI3-350	400	350	700A	68	390*245*350	200*130* 13
EM-RAI3-400	400	400	800A	78	390*265*330	200*150* 13
EM-RAI3-500	400	500	1000A	90	435*290*365	240*162* 14
EM-RAI3-560	400	560	1100A	100	435*290*385	240*162* 14
EM-RAI3-600	400	600	1250A	110	435*317*363	240*187* 14