GSM signal amplifier ST-1800,MOBILE SIGNAL BOOSTER

10 Piece/Pieces set

Specifications

1,No noise
2,No interference to the base station
3,No harm to the human body
4,Stable performance
5,Industrial design

Dear friend:we have varies item for the gsm amplifier,different item with different function,before making the order,pls talk to me firstly,i will recommand u the best one with the best price which to meet  your requirements.Pls contact me directly via TM or as the following ways:

 

 

WHAT IS THE MOBILE SIGNAL BOOSTER ?

 

Cell phone signal amplifier is a products designed to solve the mobile phone blind signal. As the mobile phone signal is transmitted by electromagnetic waves to establish a communications link, the building of the barrier, in some tall buildings inside, the basement of some places such as malls, restaurants, places of entertainment such as karaoke OK sauna and massage, underground civil air defense projects, subway stations and many other places where cell phone signals can not reach and can not use the phone. Cell phone signal amplifier can solve these problems in a particular place as long as the installation of a mobile phone signal amplifier system, the entire range of mobile phone signals can be well used, staff or customers will get great convenience .

 

 

 

Specification of mobile phone signal repeater ST1800

 

Working system	DCS1800mhz
Frequency range	uplink1710-1785MHz  downlink1805-1880MHz
Gain	Up link,68dB    Downlink, 70 dB
Export power	Up link,23dBm  Downlink,25 dBm
Pass band ripple	≤1.8DB
I/O impedence	50Ω/N connector
Noise figure	≤6dB
Transmission delay	≤0.5μs
Ambient temperature	-15°C~55°C
Power supply	AC/220V±10%   45~55Hz    DC,12V
Size	198mm×148mm×39mm
Reliability	To the GB6993-86 standard
Electromagnetic compatibility	To the ETS300 694-4 standard
Function	a)  Power supply LED denote   b)   Export power ELD denote
Coverage area	800Sqm

Application situations

 Mobile Signal Booster is specially designed for the “blind zones” of offices, family rooms, underground

parking garage, cars, lifts, elevators, factories, bars,supermarkets, mountain areas,marines, deserts,

high ways,tunnels,etc, where the signal is very poor. Or in spite of full bar signals on the mobile phone,

there is a break in voice leading to call clarity problem. Simply place the mobile phone booster in such

places, you'll be astonished with the huge gain in both the incoming reception and outgoing transmission

levels as the mobile signal booster goes to work!

Your system should come with at least the following items:

1) Outdoor Antenna (goes outside the building)

2) Siganal repeater

3) Indoor Antenna (goes inside the building)!

4) Coaxial Communication Cables

5) Connetor

6)Power Splitter

Steps:

Step 1 Start by taking your phone up to the roof or other location outside to find where the signal is strongest.

Step 2  Temporarily mount the Outdoor (outside) antenna in that location. You may need to adjust and move the antenna later.

Step 3  Run coaxial cable into the building to a convenient loaction (attic, etc.) where you can also get standard power for the Signal Repeater.

Step 4  Place the Signal Repeater in that location and connect the coaxial cable to the Outdoor Side of the Signal Repeater and the Outdoor antenna.

Step 5  Mount your Indoor (inside) antenna in a productive location. You may need to adjust or move the antenna later.

Step 6  Connect coaxial cable between the Indoor antenna and the Signal Repeater output port.

Step 7   Power up the system and check for signal inside the building. If needed, tune system by moving and or pointing the Outdoor and Indoor antennas until they get the most signal possible.

Step 8  Secure all antennas and cables, securely mount the Signal repeater and clean up the installation.