Cross-Network VoIP RoIP Gateway RoIP302 Radio Repeater
Specifications
1.radio repeater2.support SIP V2
3.Speech quality ensured by QoS
4.Line Echo Cancellation
Cross-Network VoIP RoIP gateway RoIP302 radio repeater
Overview
The fundamental of RoIP(Radio over IP)technology is to convert the audio and PTT signals in a radio terminal into IP packets and then transmit the data via the IP networks. The challenge in this technology is to insure that the audio is transmitted in real time and the PPT control signal is transmitted immediately and reliably. The radio range is general limited by the restricted transmitting power, the antenna sensitivity, and other environmental factors.
Key Features
- Open Standard VoIP Protocols (IETF SIP V2)
- Two 10/100 Ethernet for WAN / LAN connections
- Supply dynamic DNS service
- Speech quality ensured by QoS at the Ethernet and IP layers and comprehensive jitter buffer
- Line Echo Cancellation
- VLAN and QoS support
- NAT Transversal and Router functions
- Support IP voice stream to via a recording server
- Highly stable embedded Linux operating system in high performance ARM 9 Processor
Basic Features
- Support 3 PTT port
- LEDs for Power, Ready, Status, WAN, PC, FXS
- Call Forward, Call Hold, Call Transfer
- Dial Plan
- Caller ID
Enhanced Features
- Dynamic selection of codec
- Advanced jitter buffer
- Automatic traversal of NAT and firewall
- VLAN / Qos
- Router
- Echo cancellation for Speakerphone
- Comfort noise generation (CNG)
- Voice activity detection (VAD)
- Auto provisioning (requires auto provisioning server)
- On line firmware upgrade
- Multi-language support: English and Chinese
Supported Standards
- ITU: H.323 V4, H.225, H.235, H.245, H.450
- RFC 1889 - RTP/RTCP
- RFC 2327 - SDP
- RFC 2833 - RTP Payload for DTMF Digits, Telephony Tones and Telephony Signals
- RFC 2976 - SIP INFO Method
- RFC 3261 - SIP
- RFC 3264 - Offer/Answer model with SDP
- RFC 3515 - SIP REFER Method
- RFC 3842 - A Message Summary and Message Waiting Indicator
- RFC 3489 - Simple Traversal of User Datagram Protocol (UDP) Through Network Address Translators (NATs)
- RFC 3891 - SIP "Replaces" Header
- RFC 3892 - SIP Referred-By Mechanism
- draft-ietf-sipping-cc-transfer-04 - Session Initiation Protocol Call Control - Transfer
- Codec: G.711 (A/µ law), G.729A/B, G.723.1
- DTMF: RFC 2833, In-band DTMF, SIP INFO
Physical and Environmental
Operating temperature: 10°C to 40°C (50°F to 104°F)
Storage temperature: 0°C to 50°C (32°F to 122°F)
Weight: 0.35 kg (4.2 lb) (Including AC/DC Adapter)
Size: 170 mm (W) x 140 mm (L) x 65 mm (H)
Power: 12 Vdc 2A (AC/DC adapter included). Classification 0 under IEEE 802.3af on CN2x4
Warranty: one year
Product picture
Any needs please contact me.
Send Inquiry to This Supplier
You May Also Like
-
RoIP Cross Network Gateway Buildin GSM/CDMA ModuleUS$ 603.08 - 603.09MOQ: 1 Piece
-
Radio Over IP Gateway RoIP 302US$ 603.08 - 603.09MOQ: 1 Piece
-
RoIP Repeater Controller,radio Sip GatewaysUS$ 603.08 - 603.09MOQ: 1 Piece
-
Best Seller Radio Over ip Cross-network Voice Voip GatewayUS$ 603.08 - 603.09MOQ: 1 Piece
-
Radio Receiver Cross Netwrok Roip Gsm GatewayUS$ 603.08 - 603.09MOQ: 1 Piece
-
New Arrival for RoIP Gateway,VoIP Phone,GSM VoIPUS$ 904.61 - 904.62MOQ: 1 Piece
-
Cross-Network RoIP Gateway,VoIP Phone,SIP VoIPUS$ 904.61 - 904.62MOQ: 1 Piece
-
Cross-Network RoIP Gateway,VoIP Phone,SIP GatewayUS$ 904.61 - 904.62MOQ: 1 Piece
-
Newly Designed of VoIP SIP Phone Cross-Network Gateway RoIPUS$ 904.61 - 904.62MOQ: 1 Piece
-
RoIP With One PTT Port Cross Network Gateway,RoIP102US$ 138.99 - 139MOQ: 1 Piece