Ultra-thin LED Illuminated Writing Board with light box

Specifications

LED Writing Board
1. Imported Harden Acrylic board 2.4cm Thickness
2. SMD RGB color LED, 48 kinds of flash mode
3. 60x80cm

 Parameter:   

* Power supply: Input: AC 110V-220V; Output: DC12V/1A  

* Writing board voltage: DC 12V/1A  

* Temperature and humidity: Temperature: -40°C~60°C, humidity: <90%RH

 

Characteristics:  

 * The frame with high-strength aluminum alloy,designed and molded by ourselves, with thickness reach to 1.2mm     (most of others’ frames thickness reach to 0.8mm to 1.0mm in the markets). With the small pieces of oxide surface treatment,the frames can be anti-aging, cannot fade and grin commissure.  

 

* Original imported double-sided hardened acrylic plate, which is much lighter than other plates,the surface     hardness reach to 5H make it has good scratch and beat resistance(which can insure the safety of  transportation and application),with high transmission,the surface of the plate has brightness of the balance without darkness, when use the highlighters draw something on the surface of the plate will not leave indelible imprint and not penetrate into the plate.(Original acrylic plate ‘s hardening UV coating density is greater than the density of highlighter ink resin penetration and therefore will not produce the phenomenon of imprinting).  

 

* The manul&remote controller researched and developed by ourselves,which up to 48 kinds of unrepeated variable     light pattern, there is no same product among the market.  

 

* High-brightness SMD Chip 5050 (RGB) full color LED light source,no light attenuation, warranty to 50000  hours.(Brightness and color are debug by our own engineers.),while most of which are bought with ready-made light bars.   * Our adapted power with IC solution, with circuit protection, output current and voltage are stable, if it occurs  to short-circuit will not burn the power.