Home > Products > fiber optic converter&swithces&lan card > 10g media converter 2 Ports QSFP to QSFP 40G WDM Transponder OEO Converter w/full 3R Support Standalone
10g media converter 2 Ports QSFP to QSFP 40G WDM Transponder OEO Converter w/full 3R Support Standalone
- 100000 Piece / Pieces per Month
- CHINA
- T/T L/C D/P D/A Credit Card PayPal
- ZTE 5928E, RS-5928E, RS-59EC-PWR-AC10, RS-59EC-PWR-DC10, 24 GE RJ45 + 1 expansion card ZTE ZXR10 5928E 5952E 5916E RS-5916E RS-
- ZTE 2952E, RS-2952E-AC, RS-2952E-DC, 48 FE RJ45 4 GE SFP ZTE ZXR10 2952E 2928E 2918E 2910E
- ZTE 3950-28TM, RS-3950-28TM-AC, 24 FE RJ45 + 2 GE SFP + 1 expansion card slot ZTE ZXR10 3950
- ZTE 2950-18TC, RS-2950-18TC-AC, 16 FE RJ45 + 2 GE Combo ZTE ZXR10 2950
- ZTE S2XF48A, 48-port 10GE SFP+ optical interface ZTE ZXR10 8902E 8905E 8908E 8912E RS-8902E RS-8905E RS-8908E RS-8912E
- ZTE 5250-28PM-H, RS-5250-28PM-H, 20 GE RJ45 (POE/POE+) + 4 GE Combo ports + 1 expansion card ZTE ZXR10 5250
Product Details
Place of Origin: | Guangdong, China | Brand Name: | POWERLINK | Model Number: | OEO -SFP-XFP |
Product Description
10g media converter
2 Ports QSFP to QSFP 40G WDM Transponder OEO Converter w/full 3R Support Standalone
WDM Transponder (OEO)
Transponders are fiber-to-fiber media converters that convert wavelengths for Wavelength Division Multiplexing (WDM) applications.Powerlink transponders are protocol and rate-transparent fiber media converters that support SFP, SFP+ and XFP transceivers with data rates up to 11.32 Gpbs, and our transponders provide seamless integration of different fiber types by converting multi-mode fiber to single-mode fiber, and dual fiber to single-fiber.
Fiber-to-Fiber media converters extend network distance by converting wavelengths (1310 to 1550), amplifying optical power. Powerlink transponders as re-generators are also an optical – electrical – optical (O-E-O) converter with electrical amplification of the signal by FEC to realize long distances fiber transmission.
2.5G WDM Transponder OEO Converter comes with two SFP ports, are lindcard that can support the "Two Rs" to Regenerate and Reshape the optical signal.
Transponders are fiber-to-fiber media converters that convert wavelengths for Wavelength Division Multiplexing (WDM) applications.
Powerlink transponders are protocol and rate-transparent fiber media converters that support SFP, SFP+ and XFP transceivers with data rates up to 11.32 Gpbs, and our transponders provide seamless integration of different fiber types by converting multi-mode fiber to single-mode fiber, and dual fiber to single-fiber.
Fiber-to-Fiber media converters extend network distance by converting wavelengths (1310 to 1550), amplifying optical power. Powerlink transponders as re-generators are also an optical – electrical – optical (O-E-O) converter with electrical amplification of the signal by FEC to realize long distances fiber transmission.
Features
2.5G Transparent Transponders for Ethernet, SDH , Fiber Channel, OTN, digital video, others.
2R Repeater/Regenaration with FEC(Reed-Solomon Algorithms) for SDH, Ethernet and Fibre Channel.
Support DWDM/CWDM transceivers
Configurable operation mode.
Multiple chassis versions: 2RU chassis with 17 slots and single chassis.
Compact chassis design.
Redundant and modular power supplies. AC and DC. In-service replaceable.
Modular filter and fan unit. In-service replaceable.
Powerful Network Management function Web, SNMP, Console, others
OEO Converter Standalone
OEO Card for 2U Unified Platefrom Chassis
The 2ports OEO card can also compatible with 2U Unified Platefrom Chassis. Each card ( SFP+ to SFP+, XFP to SFP+, XFP to XFP, SFP to SFP ) can coexist together in this 2U 17-slot Managed chassis.
System Parameter | Technical Index | ||||
100M~1.25G | 2.5G | ||||
MIN | MAX | MIN | MAX | ||
Intput Optical Power | -30dB | -3dB | -28dB | -3dB | |
Output Optical Power | -10dB | 2dB | -5dB | 2dB | |
Extinction Ratio | 8.2dB | 8.2dB | |||
Optical Wavelength | MM | SM 1270nm-1610nm | MM | SM 1270nm-1610nm | |
850nm | 850nm | ||||
Dithering Performance | Follows ITU-T G.958 | ||||
Side Mode Suppress Ratio | > 30dB | ||||
Optical Fiber | G.652 G.653 G.655 | ||||
Product Dimensions | Chassis card | 25(W)×88(H)×116(D) (mm) | |||
Standalone | 110(W)×30(H)×140(D) (mm) | ||||
1U compact type | 441(W)×44(H)×372(D) (mm) | ||||
Environment Requirement | Operating Temperature | -10°C ~ 60°C | |||
Storage Temperature | -40°C ~ 80°C | ||||
Relative Humidity | 5% ~ 95% (noncondensing) | ||||
Power Supply (Standard) | 220V/AC, 50Hz; -48V/DC( optional) | ||||
Safety and EMC | Follows standard of FCC, UL, CE, TUV, CSA | ||||
Consumption | Standalone | ≤ 5W | |||
2U (full inserted cards) | ≤ 75W |
WDM transponders/OEO converters can be deployed in a variety of networks and applications. Follow the detailed application diagrams:
Convert Multimode to Single-Mode Fiber
Singlemode(SM) support longer distance than mutlimode(MM) fiber, it results that network often require conversion from SM to MM. Powerlink transponders can extend a MM network across SM fiber to any distance you need.
Mode conversion is typically happend when:
a. Network distance requirements exceed the limit of MM fiber
b. The equipment uses MM ports, and connectivity is required to SM equipment.
In above application, two Switches connected by a pair of WDM Transponders which convert the MM fiber to SM and enable network connectivity across the distance between the switches.
Powerlink WDM tronsponder can also convert your 10G SFP+ Direct Attach to single mode fiber.
In above application shows two 10G switches with SFP+ ports in two different locations. The switches are connected by single-mode fiber with a pair of 10G WDM tronsponder .
In the left location, a 10m 10G SFP+ Direct Attach Cable is used to connect the 10G switch port to the tronsponder.
In the right location, a pair of multimode SFP+ transceivers provide the connectivity between the tronsponder and the 10G switches. Ideal for the long distance required to connect switches exceeds the 10 meter limitation of 10G Direct Attach Cable.
Convert Dual Fiber to Single-Fiber
1) Convert Dual Fiber to Single-Fiber Conversion between dual and single-fiber is may required in the network configuration, depending on the type of equipment and the fiber installed in the facility.
In this application,two dual fiber switches are connected via single-fiber. Single-fiber is single-mode and operates with bi-directional wavelengths, often referred to as BIDI. Typically BIDI single-fiber uses 1310nm and 1550nm wavelengths over the same fiber strand in opposite directions. In this application,the transmit (Tx) at one end of the fiber link matches the receive (Rx) from the other end, and vice versa.
2) Double Fiber Capacity with Dual Fiber to Single-Fiber Conversion
As we all know, dual fiber uses the same wavelength over two different strands of fiber; with one strand as transmit (Tx) and other strand as receive (Rx).
For example:(Picture A)
Dual fiber can be converted to single-fiber as a technique to double the capacity of the existing dual fiber infrastructure:
For picture B, in this application,new switches are added to each location, and WDM Transponder double the capacity of the dual fiber link by converting each strand of the dual fiber to a BIDI single-fiber link.
For picture C, in this application, WDM transponder double the capacity of the dual fiber link by converting each strand of the dual fiber to a BIDI single-fiber link, providing redundancy protection between the two switches.
Convert Wavelengths with Transponders
Fiber network equipment with fixed fiber interfaces (ST, SC, LC FC ,etc) operating over legacy wavelengths (850nm, 1310nm, 1550nm) must be converted to CWDM wavelengths via a WDM transponder which is to automatically receives, amplifies, and then retransmits a signal on a different wavelength without altering the data/signal content.
The above picture shows a 10G signal from a Switch and is connected to a CWDM MUX/DEMUX channel port . The fiber interface on this 10G Switch(A) uses fixed fiber SC connectors and legacy 1310nm wavelength while the channel port on the CWDM MUX/DEMUX(B) requires a CWDM 1610nm wavelength,then the Transponder is utilized.
In this application,two SFP+ transceivers 1310nm standard SFP+ and 1610nm CWDM SFP+ was required to convert wavelength.
Contact Us
- Shenzhen Powerlink Electronic Technology Company Limited
- Contact nameSally kuang
- Phone86-0755-33561801
- Address35 Building,HaiTian industrial park ,PingDi Town,LongGang,ShenZhen,China Shenzhen,Guangdong
- FusionServer 2288H V6 brand-new hyperfusion server 2288H V7
- FusionServer 5288 V6 brand-new hyperfusion server
- 1550nm Polarization Maintaining Tap Isolator and WDM Hybrid
- Fortinet FortGate-100F Enterprise hardware flying tower firewall FG-100F /FG-101F
- 1550nm Polarization Maintaining Isolator
- 1550nm Polarization Maintaining Isolator
- 1310/1480/1550nm Polarization Maintaining Tap Coupler
- 1030/1053/1064nmPolarization Maintaining Optical Circulator
- P55242-B21 HPE DL360 Gen10 Plus 4314 2.4GHz 16-core 1P 32GB-R MR416i-a NC 8SFF 800W PS Server
- MX204-HW-BASE Universal Routing Platform 4-port 100G Ethernet enterprise router
- QSFP-40/100G-SRBD single-mode optical fiber module QSFP-40G-SR-BD
- Fortinet FortiGate-200F Enterprise-class flying tower firewall FG-200F Brand new original licensed goods
Popular Searches
- Optical Amplifier
- joint closure
- termination
- fiber optic
- ftth
- telecommunication
- Camera Dome Enclosure
- video transceiver
- distribution box
- Fiber Optic Equipment
- fusion splicer
- optical fiber splicing machine
- fiber optic fusion splicer
- fiber optic adapter
- optical fiber fusion splicer
- machine fiber optic fusion
Recommended Products
- FusionServer 2288H V6 brand-new hyperfusion server 2288H V7
- FusionServer 5288 V6 brand-new hyperfusion server
- 1550nm Polarization Maintaining Tap Isolator and WDM Hybrid
- Fortinet FortGate-100F Enterprise hardware flying tower firewall FG-100F /FG-101F
- 1550nm Polarization Maintaining Isolator
- Korean MRC/HANSHIN/CMR automatic telephone button film
- 1550nm Polarization Maintaining Isolator
- 1310/1480/1550nm Polarization Maintaining Tap Coupler
- OKI handset Cord FHC-1 OKI handset Cord FHC-1
- DANFOSS SYSTEM HYDRAULIK A/S VPI-E VPI-C
- 1030/1053/1064nmPolarization Maintaining Optical Circulator
- FURUNO Marine radar FAR2xx7 RF PCB 03P9349
Find Similar Products By Category
- Telecommunications > Communication Equipment > Fiber Optic Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Sally kuang
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-