Home > Products > CWDM DWDM OADM > 5 channels, 1RU Rack Mount, Duplex, CWDM Mux & Demux
5 channels, 1RU Rack Mount, Duplex, CWDM Mux & Demux
- 1000000 Piece / Pieces per Month
- china
- T/T L/C D/P D/A Credit Card PayPal
- ZTE 5928E, RS-5928E, RS-59EC-PWR-AC10, RS-59EC-PWR-DC10, 24 GE RJ45 + 1 expansion card ZTE ZXR10 5928E 5952E 5916E RS-5916E RS-
- ZTE 2952E, RS-2952E-AC, RS-2952E-DC, 48 FE RJ45 4 GE SFP ZTE ZXR10 2952E 2928E 2918E 2910E
- ZTE 3950-28TM, RS-3950-28TM-AC, 24 FE RJ45 + 2 GE SFP + 1 expansion card slot ZTE ZXR10 3950
- ZTE 2950-18TC, RS-2950-18TC-AC, 16 FE RJ45 + 2 GE Combo ZTE ZXR10 2950
- ZTE S2XF48A, 48-port 10GE SFP+ optical interface ZTE ZXR10 8902E 8905E 8908E 8912E RS-8902E RS-8905E RS-8908E RS-8912E
- ZTE 5250-28PM-H, RS-5250-28PM-H, 20 GE RJ45 (POE/POE+) + 4 GE Combo ports + 1 expansion card ZTE ZXR10 5250
Product Details
Place of Origin: | Guangdong, China | Brand Name: | powerlink | Model Number: | CWDM-18 |
Product Description
5 channels, 1RU Rack Mount, Duplex, CWDM Mux & Demux
WDM Optical Network
Wavelength Division Multiplexing (WDM) is a technology which multiplexes a number of optical carrier signals onto a single optical fiber by using different wavelengths (i.e., colors) of laser light. This technique enables bidirectional communications over one strand of fiber, as well as multiplication of capacity. Powerlink, backed by China factories, supplies a complete series of WDM Optical Network Solutions, such as multiplexers, splitters, amplifiers, attenuators, transceivers and other active or passive optical components. We provide the best products to help build and expand fiber optic networks. Customers can buy these products directly from categories below or Make Customized Orders.
WDM optical networks need multiplexer (MUX) and demultiplexer (DEMUX) to combine and split the multi-wavelength optical signals. The MUX is used to join signals together at the transmitter, while the DEMUX) is used to split signals apart at the receiver. CWDM networks use CWDM modules such as CWDM MUX/DEMUX and CWDM OADM. DWDM networks use DWDM modules such as DWDM MUX/DEMUX and DWDM OADM. Powerlink provides a series of WDM modules which enable the expansion of existing fiber capacity. Our CWDM DWDM OADM modules are available with three packagings: ABS Pigtail Module, Rack Chassis and LGX Cassette.
CWDM MUX DEMUX
Coarse Wavelength Division Multiplexing (CWDM) networks need multiplexer/demultiplexer (MUX/DEMUX) modules to combine and split the multi-wavelength optical signals. These modules are generally called CWDM MUX/DEMUX. Coupled with highly reliable passive optics (e.g., CWDM SFP/SFP+), CWDM MUX/DEMUX modlues let operators make full use of available fiber bandwidth in local loop and enterprise architectures. Powerlink provides a series of CWDM MUX/DEMUX modules with as more as 18 channels (20nm spaced) in simplex or duplex configurations. All the CWDM modules are available with three types of packaging: ABS Pigtailed Box, Rack Chassis and LGX Cassette.
Duplex CWDM MUX & DEMUX
Multiplexer (MUX) and demultiplexer (DEMUX) are combined together into a single piece of equipment for bi-directional data transmission over two fibers.
Powerlink CWDM Mux/Demux is a passive technology, it allows for any protocol to be transported over the link, as long as it is at a specific wavelength (i.e. T1 over fiber at 1570nm transported alongside 10Gbps Ethernet at 1590nm). This allows for long-term future proofing of the networking infrastructure because the multiplexers simply refract light at any network speed, regardless of the protocol being deployed.
Powerlink provides a complete portfolio of CWDM Mux Demux and Optical Add Drop Multiplexer (OADM) units to suit all applications such as: Gigabit & 10G Ethernet, SDH/SONET, ATM, ESCON, Fibre Channel, FTTx and CATV. And we provide optional port configurations such as: Express Port, Monitor Port, 1310nm passband port and 1550nm port for these multiplexers according to customer choice.
Wavegate front panel detaild example
A
Common port:
LC, SC, ST and FC connectors available.
B
Standard port 1310nm:
Allows a legacy 1310nm signal to pass. That is to say, it can carry LR optics, LX optics etc.
LC, SC, ST and FC connectors available.
C
Standard port 1550nm:
Allows a legacy 1550nm signal to pass. That is to say, it can carry ER optics, ZR optics, LX optics, ZX optics etc.
LC, SC, ST and FC connectors available.
D
Mux/Demux port for specific wavelengths:
LC, SC, ST and FC connectors available.
Compliant with the ITU G.657A1 standard as default.
E
Express port:
Enables the cascading of two CWDM mux/demux modules, doubling the channel capacity on the common fiber link.
Channel Isolation is 15dB as default, 16dB ~40dB available on request.
LC, SC, ST and FC connectors available.
F
Monitor port:
Connects measurement/monitoring equipment, such as power meters or network analyzers, to the module outputs.
When finished monitoring, disconnect the instruments and the network is left undisturbed.
LC, SC, ST and FC connectors available.
Tap percentage is 5% as default, 1%, 2%, 3%, or 10% available on request.
NOTE:
Actual layout depends on the chosen connector type as well as other factors. However, the principal scheme stays the same
We provide optional port configurations such as: Express Port, Monitor Port, 1310nm passband port and 1550nm port for these multiplexers according to customer choice. When using with 1310nm legacy SDH/SONET, CWDM wavelengths 1270, 1290, 1310, 1330 and 1350nm should not be used.
When using with 1550nm legacy SDN/SONET, CWDM wavelengths 1510, 1530, 1550, 1570 and 1590nm should not be used.
Item Details
18 channels CWDM mux and demux in one 1U Rack
Com port is duplex
1U 19 inch Rack Mount Housing
It is equipped with configuration ports like Monitor, Express port according to customer choice (see options)
Front panel is equipped with adapters according to customer choice (see options)
Passive, no electric power required. (MTBF ca. 500 years)
Insertion loss: 6dB
Simple to install, requires no configuration or maintenance
ISO 9001 manufacturing facility
Parameters | Unit | CWDM Module | ||||
Wavelength Range | nm | 1260 ~ 1620 | ||||
Channel Center Wavelength | nm | 1270 / 1290 / … / 1610 or 1271 / 1291 / … /1611 | ||||
Channel Spacing | nm | 20 | ||||
Channel Passband | nm | λc ± 7.5 | ||||
Channel No. | λ | 18 | ||||
Insertion Loss | dB | ≤0.8 | ≤1.5 | ≤2.5 | ≤5.2 | ≤6.4 |
Adjacent Channel Isolation | dB | ≥ 30 | ||||
Non-adjacent Channel Isolation | dB | ≥ 40 | ||||
Wavelength thermal stability | nm/°C | ≤ 0.003 | ||||
Insertion loss thermal stability | dB/°C | ≤ 0.005 | ≤ 0.007 | ≤ 0.008 | ||
PDL | dB | ≤ 0.1 | ≤0.15 | ≤ 0.15 | ≤ 0.20 | ≤ 0.25 |
Polarization mode dispersion | ps | ≤ 0.1 | ≤ 0.15 | |||
Directivity | dB | ≥ 50 | ||||
Return loss | dB | ≥ 45 | ||||
Optical Power | mW | ≤ 500 | ||||
Operating Temperature | °C | -10 ~ +70 | ||||
Storage Temperature | °C | -40 ~ +85 | ||||
Relative Humidity | % | 5 ~ 95 | ||||
Dimension | 1U Rackmount |
Contact Us
- Shenzhen Powerlink Electronic Technology Company Limited
- Contact nameSally kuang
- Phone86-0755-33561801
- Address35 Building,HaiTian industrial park ,PingDi Town,LongGang,ShenZhen,China Shenzhen,Guangdong
- FortiGate FortiWiFi 80F Series FG-80F/FG-81F
- 2x2 Magnet Fiber Optical Switch 1550nm
- 1550nm 1x4 Magnet Fiber Optical Switch SM
- 1520-1580nm 1x2 Magnet Fiber Optical Switch
- Magneto optical switch 1XN
- Magneto optical switch 1X1
- Magneto optical switch 1X1
- Magneto optical switch 1X4
- Magneto optical switch 1X2
- MEMS optical attenuator module
- PM MEMS VOA module
- Multi-channel MEMS VOA module
Popular Searches
- Optical Amplifier
- joint closure
- fiber optic
- ftth
- telecommunication
- Camera Dome Enclosure
- video transceiver
- distribution box
- Fiber Optic Equipment
- fusion splicer
- optical fiber splicing machine
- fiber optic fusion splicer
- fiber optic adapter
- optical fiber fusion splicer
- machine fiber optic fusion
- fiber optic splicing kit
Recommended Products
- Wireless telephone DECT cordless telephone
- FortiGate FortiWiFi 80F Series FG-80F/FG-81F
- 2x2 Magnet Fiber Optical Switch 1550nm
- 1550nm 1x4 Magnet Fiber Optical Switch SM
- 1520-1580nm 1x2 Magnet Fiber Optical Switch
- Magneto optical switch 1XN
- Magneto optical switch 1X1
- Magneto optical switch 1X1
- Magneto optical switch 1X4
- Magneto optical switch 1X2
- Cisco Fiber Switches N9K-C93180YC-FX
- MEMS optical attenuator module
Find Similar Products By Category
- Telecommunications > Communication Equipment > Fiber Optic Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Sally kuang
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-